The FXP1500-32G is a 1500 watt, power factor corrected (PFC) front-end, which provides a user- adjustable 32 VDC (26-38 VDC range) main output for test & measurement, RF amplifiers and transmitters, factory automation, semiconductor equipment, and other distributed power applications. The FXP1500-32G provides for true hot-swap with AC and DC connections at the rear of the model and can be used for redundant system applications. Its very small dimensions allow configuration of up to 2 three units in a 1U rack (up to 4500 W). The highly- efficient thermal design with internal fan cooling permits its use in wide operating voltage and temperature ranges to provide very high reliability. Status information is provided with front panel LEDs, 2 logic signals, and via the I C management interface. 2 In addition, the I C bus can enable the power supply, control the fan speed, adjust the output voltage, and set the output current limit. 28 VDC, 32 VDC and 36 VDC output voltage preset via VID pins The FXP1500-32G meets international safety 2 Margining via I C standards and displays the CE-Mark for the Active current/load sharing European Low Voltage Directive (LVD). Wide input voltage range 85-264 VAC Highly-efficient topology yields 89% at 230 VAC 1U high: 5.6 x 1.6 x 12 cassette 2 Input fuse protected I C interface status and control Test & Measurement, 3 High density design:13.4W/in RF Amplifiers & Transmitters Up to 4500 W in a 1U-high, 19-inch wide rack Factory Automation Standby voltage 5 VDC/1A Adjustable output voltage Semiconductor & LD-MOS Based Equipment Overtemperature, output overvoltage and output other Distributed Power Applications overcurrent protection ORing circuit for true redundant operation Status LEDs: AC OK, DC OK, Fan Fail/Overtemperature Fail Auto select power limits North America +1-866.513.2839 Asia-Pacific +86.755.29885888 Europe, Middle East +353 61 225 977 tech.support psbel.com 2015 Bel Power Solutions, Inc. BCD.00021 AB FXP1500-32G OUTPUT 1 OUTPUT 2 INPUT VOLTAGE RATED COMPATIBLE MODEL VAC POWER 2 Vo nom Io max Vo nom Io max SHELF 1 AUTO SELECTED W VDC ADC VDC ADC 3 FXP1500-32G 85 264 32 46.9 5 1 1505 FXR-3-32G 1 The available output power is automatically adjusted depending on the input voltage. 2 1U standard rack FXR-3-32G for FXP1500-32G is available from Bel Power Solutions. 3 Automatic derating of main output below 108 VAC to: Io max = 37.5 A (1200 W). Stress in excess of the absolute maximum ratings may cause performance degradation, adversely affect long-term reliability, or cause permanent damage to the converter. PARAMETER CONDITIONS/DESCRIPTION MIN MAX UNIT 264 VAC Input voltage Continuous Transient, 60 ms max. 300 VAC Vi min-Vi max, Io nom, cooling by internal fan Operating ambient temperature 100 % load from 0 to 50C 0 70 C linear derating to 50% load from 50C to 70C Storage temperature Non-Operating -40 85 C Specification is valid for input voltage, load, and temperature ranges, unless otherwise stated. PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNIT Input Voltage 85 230 264 VAC Input Frequency 47 50/60 63 Hz Turn-On Input Voltage Ramping up 79 - 85 VAC Turn-Off Input Voltage Ramping down 70 - 78 VAC 115/230 VAC acc. ETS 300 132-1 Inrush Current Limitation < 100 ms 50 A pk Hold-Up Time After last AC line peak ,V = 230 VAC, P 20 ms i o nom Power Factor Vi nom, Io nom 0.95 W/VA Efficiency Vi = 230 VAC, Vo nom, Io nom, Tc=25C 89 89.5 % Max Input Current 20 Arms +1.866.513.2839 tech.support psbel.com 2015 Bel Power Solutions, Inc. BCD.00021 AB