KTIR0511S Kingbright

PHOTO-INTERRUPTER Part Number: KTIR0511S Package Dimensions Features Ultra-small. Minimal influence from stray light. Low collector-emitter saturation voltage. RoHS Compliant. Applications Optical control equipment. Cameras. Floppy disk drives. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the data- sheet are subject to change without prior notice. Absolute Maximum Ratings (Ta=25C) Parameter Symbol Rating Unit Forward current I 50 mA F Reverse voltage V 6 V R Input Power dissipation Pd 75 mW Peak Forward Current (Pulse Width 100uS, Duty Cycle =1%) I 1 A FP Collector-emitter voltage V 35 V CEO Emitter-collector voltage V 6 V ECO Output Collector current I 20 mA C Collector power dissipation P 75 mW C Operating temperature Topr -25~+85 C Storage temperature Tstg -40~+100 C soldering temperature (1/16 inch from body for 5 seconds) Tsol 260 C Note: 1. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAB5687 REV NO: V.12 DATE: JUL/07/2016 PAGE: 1 OF 4 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP:1105000015 KingbrightPHOTO-INTERRUPTER Electro-optical Characteristics (Ta=25C) Parameter Symbol Conditions Min. TYP. Max. Unit Forward Voltage V I =20mA 1.0 1.2 1.5 V F F Input Reverse Current I V =6V - - 10 R R A Output Collector dark current I V =20V - - 100 nA CEO CE Collector-emitter saturation I =1mA C V - - 0.4 V CE (sat) voltage I =40mA F V =5V CE Current transfer ratio CTR - 10 - % Transfer I =20mA F characteristics Rise time tr V =2V - 5 25 CE s Response time I =2mA C Fall time tf R =100 - 4 20 s L *1 Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Fig.1 Forward Current vs. Fig.2 Collector Current vs. Forward Current Forward Voltage Fig.3 Collector Current vs. Collector-emitter Voltage SPEC NO: DSAB5687 REV NO: V.12 DATE: JUL/07/2016 PAGE: 2 OF 4 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP:1105000015 Kingbright