Hi-Reliability Optically Coupled Isolator JAN / JANTX / JANTXV 4N22, 4N23, 4N24 A Features: TO-78 hermetically sealed package High current transfer ratio 1 kV electrical isolation Base contact provided for conventional transistor biasing JAN, JANTX and JANTXV devices processed to MIL-PRF-19500 Patent No. 4124860 Description: Each isolator in this series consists of an infrared emitting diode and a NPN silicon phototransistor, which are mounted in a hermetically sealed TO-78 package. Devices are designed for military and/or harsh environments. The suffix letter A denotes the collector is electrically isolated from the case. The JAN / JANTX / JANTXV 4N22, 4N22A, 4N23, 4N23A, 4N24, and 4N24A devices are processed to MIL-PRF- 19500/486. This series of 4N products are JEDEC registered, DSCC qualified. Please contact your local representative or OPTEK for more information. Applications: High-voltage isolation between input and output Electrical isolation in dirty environments Industrial equipment Medical equipment Office Pin Function Pin Function 3 Collector 5 Anode 2 Base 6 Open 1 Emitter 7 Cathode This product is built, tested and shipped from the USA OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue G 04/2015 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 4 Hi-Reliability Optically Coupled Isolator JAN / JANTX / JANTXV 4N22, 4N23, 4N24 A Absolute Maximum Ratings (T = 25 C unless otherwise noted) A Storage Temperature Range -65 C to +150 C Operating Temperature Range -55 C to +125 C (1) Input-to-Output Isolation Voltage 1.00 kVDC (2) Lead Soldering Temperature 1/16 inch (1.6 mm) from case for 5 seconds with soldering iron 260 C ESD Class 1C Input Diode Forward DC Current (65 C or below) 40 mA Reverse Voltage 2 V Peak Forward Current (1 s pulse width, 300 pps) 1 A (3) Power Dissipation 60 mW Output Sensor: Continuous Collector Current 50 mA Collector-Emitter Voltage 40 V Collector-Base Voltage 45 V Emitter-Base Voltage 4 V (4) Power Dissipation 300 mW Notes: 1. Measured with input leads shorted together and output leads shorted together. 2. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. 3. Derate linearly 1.0 mW/ C above 65 C. 4. Derate linearly 3.0 mW/ C above 25 C. Ordering Information V Processing CE Part Isolation I (mA) F (Volts) MIL-PRF- Number Voltage (kV) Typ / Max Max 195000 JAN4N22 or JAN4N22A JANTX4N22 or JANTX4N22A JANTXV4N22 or JANTXV4N22A JAN4N23 or JAN4N23A 1 10 / 40 40 486 JANTX4N23 or JANTX4N23A JANTXV4N23 or JANTXV4N23A JAN4N24 or JAN4N24A JANTX4N24 or JANTX4N24A JANTXV4N24 or JANTXV4N24A This product is built, tested and shipped from the USA OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue G 04/2015 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 4 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com