Click on Series name for product info on aimtec.com Series AM1SR-JZ 0.75 Watt DC-DC Converter FEATURES: o o Design to meet UL/EN 62368 Operating temperature -40 C to +85 C 4 Pin SIP Package Input / Output isolation 1500 VDC 5mA low no load current Pin compatible with multiple manufacturers High efficiency up to 74% Continuous Short Circuit Protection Models Single output Max. Input Voltage Output Voltage Output Current Isolation Efficiency Model Capacitive (V) (V) Max / Min (mA) (VDC) (%) Load (F) AM1SR-0503SJZ 4.75-5.25 3.3 200 / 20 1500 2400 68 AM1SR-0505SJZ 4.75-5.25 5 150 / 15 1500 2400 72 AM1SR-0509SJZ 4.75-5.25 9 83 / 9 1500 1000 72 AM1SR-0512SJZ 4.75-5.25 12 62 / 7 1500 560 73 AM1SR-0515SJZ 4.75-5.25 15 50 / 5 1500 560 74 Input Specifications Parameters Nominal Typical Maximum Units 5 4.75-5.25 Voltage range VDC 3.3VDC, 5VDC 221/10 Input current (Full load/No load) 9VDC, 12VDC 221/20 mA 15VDC 215/30 Filter Capacitor Reflected ripple current 15 mA Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 1500 VDC Resistance > 1000 MOhm Capacitance 20 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 3 % Short Circuit protection Continuous Line voltage regulation Input voltage: 5% 1.25 % of Vin Load 10 100% for 3.3V model 3 Load voltage regulation % Load 10 100% for other models 2 o Temperature coefficient 0.02 %/ C Ripple & Noise At 20 MHz Bandwidth 30 75 mV p-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 270 KHz o o Operating temperature Derating Above 71 C -40 to +85 C o Storage temperature -55 to +125 C o Maximum case temperature 125 C Cooling Free air convection Humidity Non condensing 95 % o Soldering Lead Temperature 1.5mm from Lead, for 10 Sec 300 C Case material Plastic UL94-VO Weight 1.3 g Dimensions (L x H x W) 0.46 x 0.4x 0.24 inches 11.60 x 10.16 x 6.00 mm o MTBF >3500K hrs(MIL-HDBK -217F, Ground Benign, t=+25 C) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.E 1 of 3 North America only Series AM1SR-JZ 0.75 Watt DC-DC Converter NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Design to meet IEC/EN/UL62368, pending approval Agency approvals CISPR32/EN55032 Class B, with the recommended circuit below Standards IEC/EN 61000-4-2, Air +/-8kV, Contact +/-4kV, Criteria B Pin Out Specifications Dimensions 6.00 11.60 (0.24) Pin Single (0.46) 1 - V Input 2 +V Input 3 -V Output 4 +V Output Printed Front XXXX 7.62 (0.30) 2.45 0.50 (0.10) (0.02) Derating Free Air Convection 71 C 100 80 Safe Operating Area 60 40 20 0 85 80 100 - 40 - 20 0 20 40 60 Ambient Temperatur e C www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.E 2 of 3 North America only Output Power (%) 10.16 4.10 (0.40) 0.30 (0.161) (0.01) 0.90 (0.04) 0.50 (0.02)