Click on Series name for product info on aimtec.com Series AMEPR60-AZ up to 5A AC-DC / DC-DC LED Driver / Converter FEATURES: AC-DC Constant Current or Constant Over Temperature Protection Voltage LED Driver Over Current Protection Input range 90-305VAC/47-440Hz Waterproof Case rated IP68 High Efficiency up to 89% Power Factor Correction Operating temperature -40 to 85C Short Circuit Protection Dimmable via resistive / 0-10Vdc / PWM Models 5 Years Limited Warranty Single output Output Max Output Input Input Voltage Output OCP / Efficiency Current Model Voltage Voltage Mode of Operation Range Power OVP (%) (A) (VAC/Hz) (VDC) (V) (W) Constant Current 1.27 60 89 90-305 / AMEPR60-50120AZ 36-50 0 - 1.20 130-430 50.7 63.8 86 47-440 Constant Voltage Constant Current 1.77 59.8 88 90-305 / AMEPR60-36170AZ 24-36 0 - 1.70 130-430 36.6 63.7 86 47-440 Constant Voltage Constant Current 2.55 60 87 90-305 / AMEPR60-24250AZ 12-24 0 - 2.50 130-430 24.5 61 85 47-440 Constant Voltage Constant Current 5.2 60 85 90-305 / AMEPR60-12500AZ 5-12 0 - 5.0 130-430 12.3 62 82 47-440 Constant Voltage Exceedingthemaximumoutputpowerwillpermanentlydamagetheconverter ThedimmingfeatureisnotsupportedwhenunitsareusedinConstantVoltagemodeonly. Inconstantcurrentmodeoutputcurrentismaximumshown,inconstantvoltagemodeoutputvoltageisthemaximumshown. All models can be ordered with optional North American colour input wires (black (L), white (N), green (GND)). Add NA to part number when ordering. Note: Aimtec limited warranty of 5 years is valid based on product operation at datasheet specifications at ambient temperature of 25C, humidity<75%, nominal input voltage (115/230/277VAC) and at rated output load unless otherwise specified. See Series AMEPR60-AZ up to 5A AC-DC / DC-DC LED Driver / Converter Output Specifications Parameters Conditions Typical Maximum Units Current accuracy (CC Mode) 3 % Voltage accuracy (CV Mode) 3 % Line regulation LL-HL 1 % Load regulation 0-100% load 3 % 20MHz Bandwidth 75 mV p-p Ripple & Noise Hold-up time 90 ms Current adjustment range 100-0 % Minimum Load Voltage See the models table Tested with 0.1F (C/C) or (M/C) and 47F (E/C) parallel capacitors at the end. Note: from 0% to 10% dimming adjustment signal instability may be present. Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 3 sec/3.5mA 3000 VAC Isolation Resistance 500VDC >1000 M Isolation Capacitance 1000 pF General Specifications Parameters Conditions Typical Maximum Units Switching frequency 130 KHz Over current protection 105 % Over voltage protection Refer to Constant Current vs. Constant Voltage Mode curve Short circuit protection Continuous Short circuit restart Auto recovery Over temperature protection >105C o Operating temperature With derating over 55C -40 to +85 C o Maximum case temperature 100 C o Storage temperature -40 to +95 C o Temperature coefficient 0.02 % / C Cooling Free air convection Humidity 95 % RH Case material Plastic Potting Epoxy (IP67 rated) Wires UL1015 18AWG *20CM Weight 530 g Dimensions (L X W X H) 5.30 x 2.27 x 1.59 inches 134.80 x 57.68 x 40.50 mm MTBF >400,000 hrs (MIL-HDBK-217F at +25C) Safety Specifications Parameters Agency approvals cULus, CE UL8750, UL60950-1, EN55022, class B, EN60529(IP68), EN61347-1, EN61347-2-13 Information Technology Equipment EN55022 Class B Harmonic Current Emissions IEC/EN 61000-3-2, Class C Voltage fluctuations and flicker IEC/EN 61000-3-3, (EN60555-3) Electrostatic Discharge Immunity IEC 61000-4-2 Level 3 Standards RF, Electromagnetic Field Immunity IEC 61000-4-3 Level 2 Electrical Fast Transient / Burst Immunity IEC 61000-4-4 Level 2 Surge Immunity IEC 61000-4-5 Level 3 RF, Conducted Disturbance Immunity IEC 61000-4-6 Level 2 Power frequency Magnetic Field Immunity IEC 61000-4-8 Level 1 Voltage dips, Short Interruptions Immunity IEC 61000-4-11 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.AD 2 of 13 North America only