Click on Series name for product info on aimtec.com Series AMLD-IZ Up to 2000mA LED Driver FEATURES: High Power LED Driver Constant Output Current Wide (7:1) Input Voltage Range High Efficiency (Up to 96%) Remote Control Function PWM Digital Dimming Function (10 90%) 24 Pin DIP Package or 2x1 Inch Analogue Dimming Function (0 100%) Package Types Models Single output Maximum Rated Model Input Voltage (Vdc) Output Voltage (Vdc) Efficiency Max (%) Current (mA) AMLD-3630IZ 5-36 2-32 300 96 AMLD-3635IZ 5-36 2-32 350 96 AMLD-3650IZ 5-36 2-32 500 96 AMLD-3660IZ 5-36 2-32 600 96 AMLD-3670IZ 5-36 2-32 700 96 AMLD-3680IZ 5-36 2-32 800 96 AMLD-3690IZ 5-36 2-32 900 96 AMLD-36100IZ 5-36 2-32 1000 96 AMLD-36110IZ 5-36 2-32 1100 96 AMLD-36120IZ 5-36 2-32 1200 96 AMLD-36130IZ 5-36 2-32 1300 95 AMLD-36140IZ 5-36 2-32 1400 95 AMLD-36150IZ 5-36 2-32 1500 95 AMLD-36160IZ 5-36 2-32 1600 95 AMLD-36180IZ 5-36 2-32 1800 95 AMLD-36200IZ 5-36 2-32 2000 95 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless - otherwise specified. Analogue dimming is not supported on 1.6A, 1.8A, 2.0A models Input Specifications Parameters Nominal Typical Maximum Units Voltage range 24 5-36 36 VDC On/Off Control (Analog Control) ON: Open or 0V> V <0.6V Input voltage range (0-12Vdc) OFF: 0.6V> V <5V (1mA Max) (Leave open if not used) Dimming Control (Digital Control) Max PWM Frequency (10%~90%) 200Hz / 20KHz for all models Dimming Control (Analog Control) 0-4.5V (1mA max) Analog Voltage (0%~100%) models: AMLD-3630IZ, AMLD-3635IZ, AMLD-3650IZ Input voltage range (0-12Vdc)* (Leave open if not used) 0-6.5V (1mA max) Analog Voltage (0%~100%) models: AMLD-3660IZ, AMLD-3670IZ, For models with 1.5A and below AMLD-3680IZ, AMLD-3690IZ, AMLD-36100IZ, AMLD-36110IZ, AMLD-36120IZ NOTE: Exceeding 12Vdc on Dimming Control pin will damage the converter. Output Specifications Parameters Conditions Typical Maximum Units Current accuracy 2 % Short Circuit protection Regulated at the rated current for each model Output Open Protection No Load Max load capacitance 100 F Ripple & Noise 20MHz Bandwidth 300 mV p-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 260 1.5MHz for 1.6A, 1.8A, 2.0A models KHz -40 to +85 o Operating temperature C -40 to +70 (1.2A, 1.3A, & 1.5A, 1.6A, 1.8A, 2.0A models) o Storage temperature -40 to +125 C www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.Q 1 of 12 North America only Series AMLD-IZ Up to 2000mA LED Driver General Specifications (continued) Parameters Conditions Typical Maximum Units o Max Case temperature 100 C Cooling Free Air Convection o Thermal Impedance 13.17 C/W Humidity 95 % RH Case material Non-Conductive Black Plastic, Nickel-Coated Copper 1.3A, 1.4A & 1.5A models) Potting material Epoxy (Flammability UL94V-0) Weight 12 g 1.25 0.80 0.40 inches / 31.80 20.30 10.20 mm Dimensions (L x W x H) 1.25 0.80 0.45 inches / 31.80 20.30 11.30 mm (1.3A, 1.4A, & 1.5A models) 1.99 x 0.99 x 0.37 inches / 50.70 x 25.30 x 9.55 mm (1.6A, 1.8A, 2.0A models) Safety Specifications Parameters Agency approvals CE EN 55022, class B EN55024 Standards IEC 61000-4-2 (Perf. Criteria B) IEC 61000-4-3 (Perf. Criteria A) IEC 61000-4-6 (Perf. Criteria A) IEC 61000-4-8 (Perf. Criteria A) Pin Out Specifications Dimensions (0.3A to 1.2A models) Single Pin 1 Remote On/Off 2 -Vin 3 -Vin 9 NC 11 NC 14 LED + 16 LED - 22 +Vin 23 +Vin 24 DIM NC: Not Connected Mechanical Tolerances Case tolerance 0.25mm or 0.01 inches Pin tolerance 0.05 or 0.002 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.Q 2 of 12 North America only