LTC1386 3.3V Low Power EIA/TIA562 Transceiver FEATURES DESCRIPTIO Operates from a Single 3.3V Supply The LTC 1386 is an ultra-low power 2-driver/2-re- Low Supply Current: I = 200A ceiver EIA/TIA562 transceiver that operates from a CC ESD Protection Over 10kV single 3.3V supply. The charge pump requires only four Available in 16-Pin SOIC Narrow Package space-saving 0.1F capacitors. The supply current Uses Small Capacitors: 0.1F (I ) of the transceiver is only 200A with driver out- CC Operates to 120kBaud puts unloaded. Output Overvoltage Does Not Force Current The LTC1386 is fully compliant with all data rate and Back into Supplies overvoltage EIA/TIA562 specifications. The transceiver EIA/TIA562 I/O Lines Can Be Forced to 25V can operate up to 120kbaud with a 1000pF, 3k load. Without Damage Both driver outputs and receiver inputs can be forced to Pin Compatible with LT1181A 25V without damage and can survive multiple 10kV ESD strikes. U APPLICATIO S Notebook Computers Palmtop Computers , LTC and LT are registered trademarks of Linear Technology Corporation. TYPICAL APPLICATIO Quiescent Supply Current vs Temperature 600 1 16 TEST CONDITION: V = 3.3V V = 3.3V CC CC 0.1F 3 2 500 0.1F LTC1386 4 6 400 0.1F 0.1F 5 V CC QUIESCENT 300k CURRENT 300 11 14 LOGIC INPUT 562 OUTPUT V CC 200 300k 10 7 LOGIC INPUT 562 OUTPUT 100 12 13 LOGIC OUTPUT 562 INPUT 5k 0 20 0 20 40 60 80 TEMPERATURE (C) 9 8 LOGIC OUTPUT 562 INPUT LTC1386 TA02 5k 15 LTC1386 TA01 1386fa 1 QUIESCENT CURRENT (A) U ULTC1386 UUW ABSOLUTE AXI U RATI GS PACKAGE/ORDER I FOR ATIO Supply Voltage (V ) ................................................ 5V CC ORDER PART Input Voltage TOP VIEW NUMBER Driver ....................................... 0.3V to V + 0.3V CC + C1 1 16 V CC Receiver ............................................... 25V to 25V + V 2 15 GND LTC1386CS Digital Input ............................... 0.3V to V + 0.3V CC C1 3 14 TR1 OUT LTC1386IS Output Voltage + C2 4 13 RX1 IN Driver .................................................... 25V to 25V C2 5 12 RX1 OUT Receiver .................................... 0.3V to V + 0.3V CC V 6 11 TR1 IN Short-Circuit Duration TR2 OUT 7 10 TR2 IN + V ................................................................... 30 sec RX2 IN 8 9 RX2 OUT V ................................................................... 30 sec S PACKAGE 16-LEAD PLASTIC SO Driver Output .............................................. Indefinite Receiver Output .......................................... Indefinite T = 125C, = 95C/W JMAX JA Operating Temperature Range LTC1386C ............................................... 0C to 70C LTC1386I............................................ 40C to 85C Storage Temperature Range ................ 65C to 150C Consult LTC Marketing for parts specified with wider operating temperature ranges. Lead Temperature (Soldering, 10 sec)................. 300C DC ELECTRICAL CHARACTERISTICS The denotes specifications which apply over the full operating temperature range. V = 3.3V, C1 = C2 = C3 = C4 = 0.1F, unless otherwise noted. CC PARAMETER CONDITIONS MIN TYP MAX UNITS Any Driver Output Voltage Swing 3k to GND Positive 3.7 4.5 V Negative 3.7 4.5 V Logic Input Voltage Level Input Low Level (V = High) 1.4 0.8 V OUT Input High Level (V = Low) 2.0 1.4 V OUT Logic Input Current V = V 5 A IN CC V = 0V 20 40 A IN Output Short-Circuit Current V = 0V 9 10 mA OUT Any Receiver Input Voltage Thresholds Input Low Threshold 0.8 1.3 V Input High Threshold 1.7 2.4 V Hysteresis 0.1 0.4 1 V Input Resistance 10V V 10V 3 5 7 k IN Output Voltage Output Low, I = 1.6mA (V = 3.3V) 0.2 0.4 V OUT CC Output High, I = 160A (V = 3.3V) 3.0 3.2 V OUT CC Output Short-Circuit Current Sinking Current, V = V 5 20 mA OUT CC Sourcing Current, V = GND 2 7 mA OUT Power Supply Generator + V Output Voltage I = 0mA 5.7 V OUT I = 5mA 5.5 V OUT V Output Voltage I = 0mA 5.3 V OUT I = 5mA 5.0 V OUT Power Supply V Supply Current No Load (Note 2), 0C to 70C 0.2 0.5 mA CC No Load (Note 2), 40C to 85C 0.35 1.0 mA 1386fa 2 U WWW