Click here to ask an associate for production status of specific part numbers. Evaluate: MAX22245/MAX22246/ MAX22245/MAX22246/MAX22290/ MAX22290/MAX22291 MAX22291 Evaluation Kits MAX22291BASA+, MAX22291CASA+, MAX22291EASA+, General Description MAX22291FASA+, MAX22290BASA/V+, MAX22290CASA/V+, The MAX22245/MAX22246/MAX22290/MAX22291 eval- MAX22290EASA/V+, MAX22290FASA/V+, MAX22291BASA/V+, uation kits (EV kits) provide a proven design to evaluate MAX22291CASA/V+, MAX22291EASA/V+, MAX22291FASA/V+. the MAX22245, MAX22246, MAX22290 and MAX22291, reinforced, two-channel, galvanic digital isolators. Three Note: When ordering the MAX2224XW EV kit, request a sample of the desired MAX22245 or MAX22246 isola- types of evaluation boards are available to support this family of isolators. The MAX22246CWEVKIT is fully tor IC that can be soldered to the PCB. When ordering the MAX2229XS EV kit, request a sample of the desired assembled and tested and comes populated with the MAX22246CAWA+ (Figure 1). The MAX2224XWEVKIT MAX22290 or MAX22291 isolator IC that can be soldered to the PCB. is a generic board which has unpopulated wide SOIC foot- print as U1, allowing the user to install any MAX22245/ Features MAX22246 variant (Figure 2). The MAX2229XSEVKIT is a generic board which has unpopulated narrow SOIC Broad Range of Data Transfer Rates (from DC to footprint as U1, allowing the user to install any MAX22290/ 200Mbps) MAX22291 variant (Figure 3). Among the three evaluation MAX22245 and MAX22290 with 2:0 Channel boards, devices with either wide-body 8-pin SOIC pack- Configuration, MAX22246 and MAX22291 with 1:1 age or narrow-body 8-pin SOIC package are supported. Channel Configuration See Table 1 for EV kit options. Support Both Narrow SOIC Package and Wide SOIC The EV kits should be powered from two independent iso- Package lated power supplies with nominal output voltage in range SMA Connectors for Easy Connection to External from 1.71V to 5.5V. For evaluating the electrical parameters Equipment of the device without any isolation between the two sides, a single power supply can also be used. Wide Power Supply Voltage Range from 1.71V to 5.5V The MAX2224XWEVKIT comes with U1 unpopulated and supports the following digital isolators: MAX22245BAWA+, Guaranteed up to 5kV Isolation for 60s RMS MAX22245CAWA+, MAX22245EAWA+, MAX22245FAWA+, (MAX2224XW) MAX22246BAWA+, MAX22246CAWA+, MAX22246EAWA+, Guaranteed up to 3kV Isolation for 60s RMS MAX22246FAWA+, MAX22245BAWA/V+, MAX22245CAWA/V+, (MAX2229XS) MAX22245EAWA/V+, MAX22245FAWA/V+, MAX22246BAWA/V+, -40C to +125C Temperature Range MAX22246CAWA/V+, MAX22246EAWA/V+, MAX22246FAWA/V+. Proven PCB Layout The MAX2229XSEVKIT comes with U1 unpopulated and supports the following digital isolators: MAX22290BASA+, MAX22290CASA+, MAX22290EASA+, MAX22290FASA+, Ordering Information appears at end of data sheet. Table 1. EV Kit Options EV KIT PART NUMBER TARGET DEVICE PACKAGE TYPE COMMENT MAX22246CWEVKIT MAX22246CAWA+ 8-SOIC Wide Body 200Mbps IC Populated MAX2224XWEVKIT Not populated 8-SOIC Wide Body Request Samples of Target Device from Maxim MAX2229XSEVKIT Not populated 8-SOIC Narrow Body Request Samples of Target Device from Maxim 319-100536 Rev 1 8/21 2021 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. One Analog Way, Wilmington, MA 01887 U.S.A. Tel: 781.329.4700 2021 Analog Devices, Inc. All rights reserved.MAX22245/MAX22246/ Evaluate: MAX22245/MAX22246/ MAX22290/MAX22291 MAX22290/MAX22291 Evaluation Kits Figure 1. MAX22246CW EV Kit Figure 2. MAX2224XW EV Kit Figure 3. MAX2229XS EV Kit Analog Devices 2 www.analog.com