Q8 series
8 mm panel mount LED indicators
DISTINCTIVE FEATURES
5mm colored diffused epoxy lens or 5 mm water clear
super bright LEDs
Prominent, recessed and flush bezel styles
(2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long)
wire terminations (2.0 x 0.5) solder lug/faston terminals on
tri-color versions
ENVIRONMENTAL SPECIFICATIONS
IP67 sealing option (EN60529)
Operating & Storage Temperature Range:
Rear plastic body: -30 C to +65 C ( 22 F to +149 F)
Rear epoxy body: -40 C to +85 C ( 40 F to +185 F)
GENERAL SPECIFICATIONS
Max Reverse Voltage: 5 V
Viewing Angle: 30100 (dependant on model)
Life Expectancy: 100,000 hours
Torque: 20 to 25 cNm
Maximum panel thickness 7 mm
MATERIALS
Plated brass bezel finished in bright chrome, black or satin grey
and moulded polycarbonate rear body
Stainless Steel 316L bezel in flush version only
MOUNTING
The company reserves the right to change specifications without notice.
All LED characteristics are dependent upon environmental conditions. Therefore published data
should be considered nominal and subject to variations.
1
IND-Q8-2001
LED INDICATORSQ8 series
8 mm panel mount LED indicators
ELECTRICAL SPECIFICATIONS
Voltage Operating Voltage Operating Current
STANDARD LED INTENSITY
(Typical All
(Min to Max)
LED COMPONENT SPECIFICATIONS
Types)
Prominent and
Flush Forward Voltage 02 (No Resistor)* 1.8 to 3.3 VDC 20 mA max
Recessed
6 VDC 5.4 to 6.6 VDC 20 mA
HE Red 80 mcd 8 mcd 2.0 V
Green 60 mcd 6 mcd 2.2 V 12 VDC 10.8 to 13.2 VDC 20 mA
Yellow 50 mcd 6 mcd 2.1 V
24 VDC 21.6 to 26.4 VDC 20 mA
Blue 1,600 mcd 50 mcd 3.3 V
28 VDC 25.2 to 30.8 VDC 20 mA
White 1,600 mcd 500 mcd 3.3 V
110 VAC 99 to 121 VAC 6 mA
Orange 60 mcd 110 mcd 2.2 V
220 VAC 207 to 235 VAC 3 mA
Bi-color (Typical)
14/30 mcd 15/10 mcd 2.0V/2.2 V
(Red/Green)
* Customer to supply resistor for desired operating
current.
Tri-color (Typical)
60/15/13 mcd 15/10/6 mcd 2.0 V/2.2 V/2.1 V
(Red/Green/Yellow)
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is
produced.
SUPER BRIGHT LED INTENSITY
LED COMPONENT SPECIFICATIONS
Prominent and
Flush Forward Voltage
Recessed
HE Red 5,000 mcd 1,300 mcd 2.2 V
Green 10,000 mcd 1,200 mcd 3.3 V
Yellow 4,000 mcd 350 mcd 2.0 V
Blue 2,200 mcd 280 mcd 3.3 V
White 2,500 mcd 950 mcd 3.3 V
Orange 4,000 mcd 500 mcd 2.2 V
HYPER BRIGHT LED INTENSITY
LED COMPONENT SPECIFICATIONS
Prominent and
Flush Forward Voltage
Recessed
HE Red 6,000 mcd 980 mcd 2.2 V
Green 1,900 mcd 300 mcd 3.3 V
Yellow 1,600 mcd 250 mcd 2.0 V
Orange 2,400 mcd 110 mcd 2.2 V
The operating voltage must not be exceeded by more that
10% as this will result in reduced life expectancy
Luminous intensity is measured at 20 mA on a discrete led
unless otherwise stated.
Luminous intensities and color shades of white LEDs may
vary within a batch.
Luminous intensity will be reduced with lower operating
current.
2
LED INDICATORS