QRM-NV series 8 and 14 mm rear panel mount NVIS LED indicators DISTINCTIVE FEATURES NVIS Green A, NVIS Green B, NVIS Yellow, NVIS Red, NVIS White NVIS compliant to MIL Std 3009 200 mm wire for 8 and 14 mm or rigid pin (1.00 mm) for 8 mm terminations ENVIRONMENTAL SPECIFICATIONS IP67 sealing option (EN60529) Operating Temperature Range: -40 C to +85 C ( 40 F to +185 F) Storage Temperature Range: -55 C to +100 C (-67 F to +212 F) GENERAL SPECIFICATIONS Max Reverse Voltage: 5 V Viewing Angle: 60 Life Expectancy: 100,000 hours Max Panel Thickness: 3.5 mm Torque: 8 mm: 60 cNm 14 mm: 75 cNm ELECTRICAL SPECIFICATIONS Voltage Operating Voltage Operating Current (Min to Max) (Typical All Types) 02 (No Resistor) 2.1 to 3.3 VDC 20 mA max 6 VDC 5.4 to 6.6 VDC 20 mA 12 VDC 10.8 to 13.2 VDC 20 mA 24 VDC 21.6 to 26.4 VDC 20 mA 28 VDC 25.2 to 30.8 VDC 20 mA LED COMPONENT SPECIFICATIONS LED Color NVIS Radiance NVIS Chromoticity Dominant Wavelength MCD Output Forward Voltage NW1S Green A NRa 1.7eE-10 0.1fL r .037 530 nm 150 mcd 3.3 V NW1S Green B NRA 1.7eE-10 0.1fL r .057 555 nm 150 mcd 3.3 V NW1S Yellow Class A 5.0E-8 NRA 1.5E-7 15fL r .083 - 150 mcd 3.3V NW1S Yellow Class B 4.7E-8 NRB 1.47E-7 15fL r 0.83 585 nm 150 mcd 3.3 V NW1S Red 4.7E-8 NRB 1.4E-7 15 fL r .060 605 nm 110 mcd 2.1 V NW1S White NRA 1.0E-9 0.1fL r .40 (x).33 (y).33 150 mcd 3.3 V The company reserves the right to change specifications without notice. LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal and subject to variations. 1 IND-QRM-NV-1909 LED INDICATORSQRM-NV series 8 and 14 mm rear panel mount NVIS LED indicators ELECTRICAL SPECIFICATIONS MOUNTING (CONTINUED) The operating voltage must not be exceeded by more that 8 MM 10% as this will result in reduced life expectancy Luminous intensity is measured at 20 mA on a discrete led unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. Luminous intensity will be reduced with lower operating current. 14 MM 17,00 0,669 AF 3,00 0,118 MATERIALS 6.4 0.251 Body: Black plated brass or anodized aluminum Lock Washer: Spring steel 14,0+0.15/-0.0 M14 x 1,0 THREAD Nut: Black plated brass 0.551+0.005/-0.0 Terminal Seal: Epoxy Panel Seal: Nitrile O-ring Wires: 8 mm : 24 AWG - Approved to UL1213 14 mm: 22A WG - Approved to UL1007 2 LED INDICATORS