Standard Materials and Finishes The following are Glenair s standard finishes. Individual product pages within this catalog list their most common finishes. Additional finishes are listed within the table below. TABLE II - STANDARD FINISHES GLENAIR M85049 SYMBOL SYMBOLREFERENCE ONLY FINISH SPECIFICATION(S) B Cadmium Plate, Olive Drab AMS-QQ-P-416, Type II, Class 3 C* A Anodize, Black AMS-A-8625, Type II, Class 2 G* Hard Coat, Anodic AMS-A-8625, Type III, Class 1 J Iridite, Gold Over Cadmium Plate MIL-C-5541, Class 3 AMS-QQ-P-416, Type II, Over Electroless Nickel Class 3 over AMS-C-26074, Class 3 or 4, Grade B Cadmium Plate, Bright Over 1000 Hour Corrosion Resistance LF Electroless Nickel Electroless Nickel AMS-C-26074, Class 4, Grade B & ASTM B733-90, SC2, Type 1, Class 4 M N Cadmium Plate, Olive Drab Over AMS-QQ-P-416, Type II, Class 3 over Electroless Nickel N Electroless Nickel AMS-C-26074 Zinc Cobalt, Dark Olive Drab 96 Hour Corrosion Resistance NC W Cadmium Plate, Olive Drab Over 1000 Hour Corrosion Resistance NF Electroless Nickel Cadmium Plate, Bright Over AMS-QQ-P-416, Type II, Class 3 over Electroless Nickel, AMS-C-26074, T Electroless Nickel Class 3 or 4, Grade B U** Cadmium Plate, Black AMS-QQ-P-416, Type II, Class 3 Zinc-Nickel Alloy, Olive Drab ASTMB 841-91, Over Electroless Nickel ZN 1000 Hour Salt Spray * Anodize finish not suitable for EMI Shielding or grounding applications. ** Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. STANDARD MATERIALS - BACKSHELLS AND ACCESSORIES COMPONENT MATERIAL SPECIFICATION Machined components: such as backshell bodies, fabricated elbows, protective covers, Aluminum AMS-QQ-A-200 rotatable couplers, dummy stowage receptacles, lock nuts, G-spring support rings, ASTMB221, 209 EMI ground rings, grommet followers, etc. Die cast components: such as angular backshells, strain relief backshells, strain relief Aluminum QQ-A-591 bodies, strain relief saddles, special EMI ground rings, etc. ASTMB85, 26 Backshells or strain reliefs: available in optional corrosion resisting steel and Corrosion Resisting ASTMA582 (300 Series) hardware: such as screws, washers, rivets, wire rope, sash chain, band straps, etc. Steel AMS-QQ-S-763 Silicone ZZ-R-765, MIL-R-25988 Elastomeric seals: such as O-rings, cable jacket seals, grommets, etc. Anti-friction and thrust washers Teflon TFE Anti-rotation device Corrosion Resistant N/A Material NOTES Unless otherwise specified, the following dimensional tolerances will apply: .xx = .03 (0.8) .xxx = .015 (0.4) Lengths = .060 (1.52) Angles = 5 Metric dimensions (mm) are indicated in parentheses 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com 3 Reference Information557-107 D-Subminiature Light-Weight Solid Banding Backshell 557-107 M 2-03 C B Basic Part No. B = Band Supplied (600-052), Omit for None Finish Symbol (Page 3) C = Supplied with Retainer Shell Size (Table I) Clips and Jackscrews (Omit C Retainer Cable Entry (Table II) for None) Clip Option G F Note 2 .380 (9.7) D E .035 (.9) Connector Shown For Reference Only A .120 (3.0) .005 (.1) C 2 Places B Table II: Cable Entry Entry Size F G .125 (3.2) Radius 02 .125 (3.2) .205 (5.2) 2 Places 03 .187 (4.7) .267 (6.8) Table I: Shell Size & Connector Interface Dimensions 04 .250 (6.4) .330 (8.4) 05 .312 (7.9) .392 (10.0) Shell C 06 .375 (9.5) .455 (11.6) Size A B .005 (.1) 07 .437 (11.1) .517 (13.1) 1* 1.203 (30.6) .500 (12.7) .984 (25.0) 08 .500 (12.7) .580 (14.7) 2* 1.531 (38.9) .500 (12.7) 1.312 (33.3) 09 .529 (13.4) .609 (15.5) 3* 2.078 (52.8) .500 (12.7) 1.852 (47.0) 10 .290 (7.4) .370 (9.4) 4* 2.718 (69.0) .500 (12.7) 2.500 (63.5) 1 1 .595 (15.1) .675 (17.2) 5 2.625 (66.7) .609 (15.5) 2.406 (61.1) 12 .270 (6.9) .350 (8.9) 6 2.718 (69.0) .668 (17.0) 2.500 (63.5) * Maximum Entry Size (Table II) is 06 1. Metric dimensions (mm) are indicated in parentheses. 2. End Fitting may be brazed on per MIL-B-7883B, Type V, Grade B 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com A-63 MIL-DTL-24308 D-Subminiature