803-003-07M6-7SN Glenair

Series 803 Series 803 Mighty Mouse, Turn Bayonet Coupling Receptacle with Crimp Removable Contacts 803-003 and 803-004 Ordering Information Series 803 receptacle feature Push-To-Mate, turn to lock mating. These quick-mating connectors feature bayonet pins on the receptacle. Simply push the connectors together, then rotate the plug coupling nut 90 to lock the connectors together. Supplied with crimp contacts, packaged separately. Terminate contacts with standard M22520 tools. Metal clips inside the connector body lock contact into place and are removable. Fluorosilicone interfacial seal and rear grommet protect from water ingress. Integral band platform and boot groove for direct attachment of a cable shield, for use with Band-Master ATS band (sold separately), and complete cable termination with Series 77 heat-shrink boot or overmold directly onto the band platform. Select accessory thread option to attach backshell or strain relief attachments. How To Order Table III: Keyway Polarization Sample Part Number 803-003 -07 NF 6-7 S N 803-003 = Receptacle with Banding Platform Series (See Table I) 803-004 = Receptacle with Accessory Thread Shell Style -01 = In-Line -02 = Flange Mount -07 = Jam-Nut (See Table II) C = Aluminum / Black Anodize (Non-Conductive) RoHS Compliant M = Aluminum / Electroless Nickel RoHS Compliant A B Shell Material and MT = Aluminum / Nickel-PTFE RoHS Compliant Finish NF = Aluminum / Cadmium with Olive Drab Chromate ZNU = Aluminum / Zinc-Nickel with Black Chromate Z1 = Stainless Steel / Passivated RoHS Compliant Shell Size - Insert See Contact Arrangements Page F-2 Arrangement Connector supplied Connector supplied with contacts without contacts P = Pin A = Pin Connector, less contacts Pos. A B Contact Type S = Socket B = Socket Connector, less contacts N 150 210 Contacts are supplied loose and not installed when supplied with connector. X 75 210 Coaxial contacts and non-standard signal contacts are ordered separately. Y 95 230 Polarization N = Normal X = Pos. X Y = Pos. y Z = Pos. Z F Z 140 275 (See Table III) Table I: Series Table II: Shell Style 803-003 803-004 -01 -02 -07 Plug with Banding Platform Plug with Accessory Thread In-line Flange Mount Jam-Nut NOTES 1. Contacts are size 23 crimp type, and are used in a rear release Positioner for use with crimp frame:Glenair Part No. 809-005 retention system Insertion tool: Glenair part no. 809-013 Extraction tool: Glenair part no. 809-007 (metal) and 809-0019 2. For additional insert arrangements consult factory (plastic) 3. Crimp barrel accommodates 22, 24, 26 and 28 gage wire 5. Connector mates with all bayonet plug connectors with same 4. Crimp Tool Data: polarization and opposite contact gender Crimp Frame: M22520/2-01 Dimensions in Inches (millimeters) are subject to change without notice. 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com F-10 E-Mail: sales glenair.com Rev. 05.28.19Series 803 Mighty Mouse Turn Bayonet Coupling Receptacle with Crimp Removable Contacts 803-004-07 and 803-003-07 Dimensions Jam-nut rear panel mount receptacle - shell style 07 1.030 (26.16) MAX 1.060 (26.92) MAX .580 (14.73) .580 (14.73) MASTER KEYWAY A C D G D FLAT F THREAD E THREAD E THREAD B FLATS TYP .100 (2.54) MAX .100 (2.54) MAX PANEL THICKNESS PANEL THICKNESS Integral Band Platform Accessory Thread 803-003-07 803-004-07 Dimensions Shell Size A B Flats C Flat D E Thread F Thread G 5 .575 (14.60) .545 (13.84) .350 (8.89) .300 (7.62) .3750-32 UNEF-2A .2500-32 UNEF-2A .230 (5.84) 6 .635 (16.13) .595 (15.11) .410 (10.41) .362 (9.19) .4375-28 UNEF-2A .3125-32 UNEF-2A .286 (7.26) 7 .755 (19.18) .723 (18.36) .536 (13.61) .436 (11.07) .5625-32 UN-2A .4375-28 UNEF-2A .390 (9.91) 8 .755 (19.18) .790 (20.07) .593 (15.06) .508 (12.90) .6250-28 UN-2A .5000-28 UNEF-2A .440 (11.18) 9 .830 (21.08) .790 (20.07) .596 (15.14) .561 (14.25) .6250-28 UN-2A .5625-24 UNEF-2A .500 (12.70) 10 .890 (22.61) .925 (23.50) .721 (18.31) .635 (16.13) .7500-28 UN-2A .6250-24 UNEF-2A .562 (14.27) 12 1.078 (27.38) 1.044 (26.52) .845 (21.46) .714 (18.14) .8750-28 UN-2A .6875-24 UNEF-2A .650 (16.51) F 14 1.264 (32.11) 1.230 (31.24) 1.022 (25.96) .865 (21.97) 1.0625-20 UN-2A .9375-20 UNEF-2A .805 (20.45) Jam-Nut Panel Cutout Dimensions Material and Finish B Shell, jam-nut: Aluminum alloy or CRES A Flat Shell Size +.005 (+ 0.13) / see how to order table .002 (.05) -.000 (-.00) Insulator: LCP or epoxy / N.A. 5 .355 (9.02) .380 (9.65) Interfacial seal, grommet seal: B 6 .415 (10.54) .442 (11.23) fluorosilicone / N.A577 (14.66) Contact: copper alloy / gold plate per 7 .541 (13.74) A FLAT .567 (14.40) ASTM B 488, Type II, Class 1.25, over 8 .601 (15.27) .630 (16.00) suitable underplate 9 .601 (15.27) .630 (16.00) 10 .729 (18.52) .755 (19.18) 12 .850 (21.59) .880 (22.35) 14 1.031 (26.19) 1.067 (27.10) Dimensions in Inches (millimeters) are subject to change without notice. 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com F-11 E-Mail: sales glenair.com Rev. 05.28.19 Series 803