Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.comCYBLE-022001-00 EZ-BLE Creator Module EZ-BLE Creator Module RX current consumption of 16.4 mA (radio only) General Description Low power mode support The Cypress CYBLE-022001-00 is a fully certified and qualified Deep Sleep: 1.3 A with watch crystal oscillator (WCO) on module supporting Bluetooth Low Energy wireless Hibernate: 150 nA with SRAM retention communication. The CYBLE-022001-00 is a turnkey solution Stop: 60 nA with XRES wakeup and includes onboard crystal oscillators, chip antenna, passive components, and Cypress PSoC 4 Bluetooth LE. Refer to the Functional Capabilities PSoC 4 Bluetooth LE datasheet for additional details on the capabilities of the PSoC 4 Bluetooth LE device used on this Up to 15 capacitive sensors for buttons or sliders with module. best-in-class signal-to-noise ration (SNR) and liquid tolerance The CYBLE-022001-00 supports a number of peripheral 12-bit, 1-Msps SAR ADC with internal reference, functions (ADC, timers, counters, PWM) and serial sample-and-hold (S/H), and channel sequencer 2 communication protocols (I C, UART, SPI) through its 2 programmable architecture. The CYBLE-022001-00 includes a Two serial communication blocks (SCBs) supporting I C royalty-free Bluetooth LE stack compatible with Bluetooth 5.1 (master/slave), SPI (master/slave), or UART and provides up to 16 GPIOs in a small 10 10 1.80 mm Four dedicated 16-bit timer, counter, or PWM blocks package. (TCPWMs) The CYBLE-022001-00 is a complete solution and an ideal fit for Programmable low voltage detect (LVD) from 1.8 V to 4.5 V applications requiring Bluetooth LE wireless connectivity. 2 I S master interface Module Description Bluetooth Low Energy protocol stack supporting generic Module size: 10.0 mm 10.0 mm 1.80 mm (with shield) access profile (GAP) Central, Peripheral, Observer, or Bluetooth 5.1 single-mode module Broadcaster roles Industrial temperature range: 40 C to +85 C Switches between Central and Peripheral roles on-the-go 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit Standard Bluetooth Low Energy profiles and services for multiply, operating at up to 48 MHz interoperability 128-KB flash memory, 16-KB SRAM memory Custom profile and service for specific use cases Watchdog timer with dedicated internal low-speed oscillator Benefits (ILO) The CYBLE-022001-00 module is provided as a turnkey Two-pin SWD for programming solution, including all necessary hardware required to use Up to 16 GPIOs configurable as open drain high/low, Bluetooth LE communication standards. pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output Proven, qualified, and certified hardware design ready to use Certified to FCC, ISED, MIC, KC, ANATEL, and CE regulations Small footprint (10 10 mm 1.80 mm), perfect for space FCC ID: WAP2001 constrained applications IC ID: 7922A-2001 Reprogrammable architecture MIC ID: 005-101007 KC ID: MSIP-CRM-Cyp-2001 Fully certified module eliminates the time needed for design, development and certification processes Bluetooth SIG 5.1 qualified QDID: 141250 Bluetooth SIG qualified with QDID and Declaration ID Declaration ID: U048555 Flexible communication protocol support Power Consumption PSoC Creator provides an easy-to-use integrated design TX output power: 18 dbm to +3 dbm environment (IDE) to configure, develop, program, and test a Bluetooth LE application Received signal strength indicator (RSSI) with 1-dB resolution TX current consumption of 15.6 mA (radio only, 0 dbm) Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 001-95662 Rev. *N Revised December 23, 2020