Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C700, Encapsulated, KJN Type, X1 440 VAC/Y1 250/400 VAC (Industrial Grade) Overview KEMETs C700, encapsulated radial leaded ceramic disc capacitor fail, but could result in a risk of fire. The class Y capacitors are specifically designed for interference- capacitor is primarily used in line-to-ground (line by-pass) suppression AC line filtering applications. Having applications. In this application, failure of the capacitor could internationally recognized safety certifications, these lead to danger of electric shock. capacitors are well-suited for applications that require keeping potentially disruptive or damaging line transients With a working voltage of 440 VAC in line-to-line (Class X) and EMI out of susceptible equipment. They are also an and 250/400 VAC in line-to-ground (Class Y) applications, ideal solution when needing to suppress line disturbances these safety capacitors meet the impulse test criteria at the source. outlined in IEC Standard 60384. Meeting subclass X1 and Y1 requirements, these devices are certified to withstand Safety Certified Capacitors are classified as either X and/or impulses up to 4 KV (X1) and 8 KV (Y1) respectively. These Y capacitors. Class X capacitors are primarily used in line- encapsulated devices also meet the flame test requirements to-line (across-the-line) applications. In this application, outlined in UL Standard 94 V-0. there is no danger of electric shock to humans should the Benefits Safety standard recognized (IEC 60384-14) Reliable operation up to 125C Class X1 440 VAC/ Y1 250/400 VAC 10mm and 12.5 mm lead spacing Lead(Pb)-free and RoHS Compliant Halogen-free Capacitance offerings ranging from 8 pF 4.7 nF Available capacitance tolerances of 5%, 10%, and 20% High-reliability Preformed (crimped) or straight lead configurations Non-polar device, minimizing installation concerns 100% pure matte tin-plated lead finish, allowing for excellent solderability Encapsulation meets flammability standard UL 94 V-0 Applications Typical applications include: Line-to-line (Class X) filtering Line-to-ground (Class Y) filtering Antenna coupling Primary and secondary coupling (switching power supplies) Line disturbances suppression (motors and motor controls, relays, switching power supplies and invertors) Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1104 KJN 10/11/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comRadial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C700, Encapsulated, KJN Type, X1 440 VAC/Y1 250/400 VAC (Industrial Grade) Ordering Information C7 7 1 U 472 M S W D A A 7301 Ceramic Body Lead Capacitance Capacitance Rated Dielectric/ Lead Failure Packaging Spec. Design 1,3 2,3 Series Diameter Spacing Code (pF) Tolerance Voltage Temp. Char. Configuration Rate (C-Spec) C7 = 2 = 9.0 mm 1 = 10.0 mm U = Two J = 5% S = X1 S = SL D = A = Straight A = See Ceramic 3 = 10.0 mm 2 = 12.5 mm Safety significant K = 10% 440 Y = Y5P Disc B = Vertical N/APackaging 700 4 = 11.0 mm digits and M = 20% VAC/ W = Y5U Kink C-Spec 5 = 12.0mm Number of Y1 400 V = Y5V C = Outside Ordering 6 = 13.0 mm zeroes VAC Kink Options 7 = 14.0 mm T = X1 D = Inside Tabl 8 = 15.0 mm 440 Kink below VAC/ Y1 250 VAC 1 Capacitor body diameter will limit available lead spacing and packaging options. SeeDimension andProduct Ordering Codes and Rating sections of this document to determine availability. 2 Vertical Kin,Outside Kin, andInside Kin lead configurations cannot be combined with the bulk/25 mm lead length option (WL25). 25 mm lead length is only available on capacitors with straight leads (lead configuration ordering code). For nonstandard lead length inquiries, please contact KEMET. 3 Bulk packaging lead length availability is dependent uponLead Configuratio andLead Spacing SeeDimension section of this document to verify availability of a specific lead length option. For nonstandard lead length inquiries, please contact KEMET. Packaging C-Spec Ordering Options Table Lead Length Packaging Packaging Type 2,3 (mm) Ordering Code (C-Spec) Reel 25 mm 7301 25 mm +1.5/1.0 (straight leads) 4 Ammo Pack 7317 1 18.0 +2.0/0 (preformed leads ) 3.0 1.0 WL30 3.5 1.0 WL35 4.0 1.0 WL40 Bulk Bag 4.5 1.0 WL45 5.0 1.0 WL50 10.0 1.0 WL10 25.0 1.0 WL25 1 Preformed (crimped) lead configurations includeVertical Kin,Outside Kin andInside Kin. SeeLead Configuration andOrdering Informatio sections of this document for further details. 2 Vertical Kin,Outside Kin andInside Kin lead configurations cannot be combined with the bulk/25 mm lead length option (WL25). 25 mm lead length is only available on capacitors with straight leads (lead configuration ordering code). For nonstandard lead length inquiries, please contact KEMET. 3 For nonstandard lead length inquiries, please contact KEMET. 4 Lead length for ammo pack packaging is defined by the H and H0 dimensions in Table 3. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1104 KJN 10/11/2021 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com