Drop-In Monolithic Ampliefi r DC-1 GHz Features a,b Exact foot print substitute for MAR-8 and MSA-0885 Benefits: lower device voltage, 3.7 typ. lower power dissipation in the MMIC may eliminate need for choke (RFC) Generic photo used for illustration purposes only High gain, 31.5 dB at 0.1 GHz, reduces component count Internally Matched to 50 Ohms MAR-8A+ High power output, +12.5 dBm typ. CASE STYLE: VV105 Low noise Improved stability Protection against power supply transients +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site Patent pending for RoHS Compliance methodologies and qualifications Aqueous washable Applications Cellular PCN & instrumentation General Description MAR-8A+ (RoHS compliant) is a wideband amplifier offering high dynamic range. It has repeatable perfor - mance from lot to lot. It is enclosed in a Micro-X package. MAR-8A+ uses Darlington configuration and is fabricated using InGaP HBT technology. simplified schematic and pin description RF-OUT and DC-IN RF-OUT and DC-IN 3 RF IN 4 GND GND 2 1 RF IN GROUND Function Pin Number Description RF input pin. This pin requires the use of an external DC blocking capacitor chosen RF IN 1 for the frequency of operation. RF output and bias pin. DC voltage is present on this pin therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias RF-OUT and DC-IN 3 without loss of RF signal due to the bias connection, as shown in Recommended Application Circuit. Connections to ground. Use via holes as shown in Suggested Layout for PCB GND 2,4 Design to reduce ground path inductance for best performance. Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. The Avago MSA-0885 part number is used for identification and comparison purposes only. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp REV. D M151107 MAR-8A+ Mini-Circuits 200930 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 4Monolithic InGaP HBT MMIC Amplifier MAR-8A+ Electrical Specifications at 25C and 36mA, unless noted 3 Parameter Min. Typ. Max. Units Frequency Range* DC 1 GHz f=0.1 GHz 31.5 dB Gain 2 f=1 GHz 20 25 f=DC to 1 GHz 15.5 dB Input Return Loss f=DC to 1 GHz 11 dB Output Return Loss f=1 GHz +12.5 dBm Output Power 1 dB compression Output IP3 f=1 GHz +25 dBm Noise Figure f=1 GHz 3.1 dB Recommended Device Operating Current 36 mA Device Operating Voltage 3.2 3.7 4.2 V Device Voltage Variation vs. Temperature at 36 mA +1.2 mV/C Device Voltage Variation vs. Current at 25C 11.3 mV/mA 1 Thermal Resistance, junction-to-case 119 C/W *Guaranteed specification DC-1 GHz. Low frequency cut off determined by external coupling capacitors. Absolute Maximum Ratings Parameter Ratings Operating Temperature -40C to 85C Storage Temperature -55C to 100C Operating Current 65mA Power Dissipation 250mW Input Power 13dBm Note: Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation. 1 Case is defined as ground leads. 2 Full temperature range. 3 Based on test data of Model MAR-8ASM+ (Case Style WW107). Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 2 of 4