7-1415356-1 TE Connectivity

General Purpose Low Power PCB Relays SCHRACK Miniature Power PCB Relay PBH 105C n 1pole 6 A, 1 form C (CO) or 1 form A (NO) contact n Environmentally-friendly cadmium-free contacts n Class F coil system standard n For ambient temperatures up to 105C n Product in accordance to IEC 60335-1 Typical applications White goods, domestic appliances. Z Approvals Coil Data VDE Cert. No. 40008364, UL E214025 Coil voltage range 5 to 36 VDC Technical data of approved types on request. Operative voltage range, % of rated coil voltage 90 to 100 % Contact Data Coil versions, DC coil Contact arrangement 1 form C (CO) or 1 form A (NO) Coil Rated Operate Release Coil Rated coil Rated voltage 250VAC code voltage voltage voltage resistance power Max. switching voltage 400VAC VDC VDC VDC 10% mW Rated current 6A 005 5 3.75 0.5 70 357 Limiting continuous current 6.5 A 006 6 4.50 0.6 100 360 Limiting making current, max 4 s, duty factor 10% 10A 009 9 6.75 0.9 225 360 Breaking capacity max. 1500VA 012 12 9.00 1.2 400 360 Contact material AgNi 90/10 018 18 13.50 1.8 900 360 -1 Frequency of operation, with/without load 360/36000h 022 22 16.50 2.2 1344 360 Operate/release time max. 10/20ms 024 24 18.00 2.4 1600 360 Bounce time max., form A/form B 10/15ms 048 48 36.00 4.8 6400 360 All figures are given for coil without pre-energization, at ambient temperature +23C. Other coil voltages on request. Contact ratings Type Contact Load Cycles IEC 61810 3 PBH14 C (CO) 6.5A, 250VAC, cos=1, 105C 10x10 3 PBH34 A (NO) 6.5A, 250VAC, cos=1, 105C 100x10 3 PBH14 A of C 6.5A, 250VAC, cos=1, 105C 100x10 3 PBH34 A (NO) 2A, 250VAC, cos=0.55, 105C 250x10 3 PBH14 A of C 2A, 250VAC, cos=0.55, 105C 250x10 3 PBH34 A (NO) 6.5A, 440VAC, cos=1, 105C 50x10 UL 508 3 PBHx4 A (NO) 6A, 415VAC, cos=1, 105C 50x10 6 Mechanical endurance, DC coil 2x10 operations Insulation Data Initial dielectric strength between open contacts 1000V rms between contact and coil 2500V rms Clearance/creepage between contact and coil form C (CO) version 3/4mm form A (NO) 4/5mm Material group of insulation parts IIIa Tracking index of relay base PTI250 1 10-2014, Rev. 1014 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2014 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company. General Purpose Low Power PCB Relays SCHRACK Miniature Power PCB Relay PBH 105C (Continued) 1) Other Data PCB layout / terminal assignment Bottom view on solder pins Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Resistance to heat and fire according EN60335, par.30 Ambient temperature, DC coil -20 to +105C Category of environmental protection IEC 61810 RTII - flux proof Vibration resistance (functional) form A/form B, 30 to 400Hz >10/4g Shock resistance (destructive) >100g Terminal type PCB-THT Weight 5.4g Resistance to soldering heat THT IEC 60068-2-20 270C/10s Packaging/unit tube/35 pcs., box/1050 pcs. Dimensions 1) Layout note: No openings (e.g. holes, slots, cut outs, unused pins, open through connexions, etc.) allowed under the relay base. The relay base must be fully covered by the PCB, recommended minimum distance between the relay and the edge of the printed circuit board is 5 mm. For more information, please contact our application support. Product code structure Typical product code PB H 1 4 012 Type PB Miniature Power PCB Relay PB 105C Version H High temperature version Contact configuration 1 1 form C contact (1 CO) 3 1 form A contact (1 NO) Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table Other types on request. Product code Version Contacts Contact material Coil Part number PBH14005 High 1 form C AgNi 90/10 5VDC 9-1415356-1 PBH14006 temperature 1 CO contact 6VDC 8-1415356-1 PBH14009 version 9VDC 7-1415356-1 PBH14012 12VDC 6-1415356-1 PBH14018 18VDC 6-1415357-1 PBH14022 22VDC 7-1415357-1 PBH14024 24VDC 6-1415355-1 PBH14036 36VDC 9-1415355-1 PBH34005 1 form A 5VDC 5-1415356-1 PBH34006 1 NO contact 6VDC 4-1415356-1 PBH34009 9VDC 3-1415356-1 PBH34012 12VDC 2-1415356-1 PBH34018 18VDC 8-1415357-1 PBH34022 22VDC 9-1415357-1 PBH34024 24VDC 1-1415356-1 PBH34036 36VDC 1415356-1 2 10-2014, Rev. 1014 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2014 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company.