SCD
55PC1213
SPECIFICATION CONTROL DRAWING
Title
Date Revision
ONE CONDUCTOR CABLE, SHIELDED, JACKETED, GENERAL PURPOSE, 600 VOLT
10-6-15 B
This specification sheet forms a part of the latest issue of Raychem Specification 55PC.
COMPONENT WIRE - 55PC0213 SHIELD - NICKEL-COATED COPPER JACKET - RADIATION-CROSSLINKED,
MODIFIED ETFE
CABLE CONSTRUCTION DETAILS
JACKET THICKNESS OUTSIDE DIAMETER WEIGHT
CONDUCTOR SHIELD
(inch) (inch) (lbs/1000 ft.)
PART NUMBER
SIZE SIZE
1/
LOWER TARGET LOWER TARGET UPPER TARGET UPPER
(AWG) (AWG)
SPEC LIMIT WALL SPEC LIMIT VALUE SPEC LIMIT VALUE SPEC LIMIT
55PC1213-26-* 26 38 .0050 .0060 .060 .064 .068 4.40 4.68
55PC1213-24-* 24 38 .0050 .0060 .065 .069 .073 5.28 5.57
55PC1213-22-* 22 38 .0050 .0060 .071 .075 .079 6.59 6.89
55PC1213-20-* 20 38 .0050 .0060 .080 .083 .087 8.62 8.96
55PC1213-18-* 18 38 .0050 .0060 .089 .093 .097 11.43 11.84
55PC1213-16-* 16 38 .0050 .0060 .097 .100 .104 13.68 14.11
55PC1213-14-* 14 38 .0050 .0065 .112 .116 .120 19.28 19.85
55PC1213-12-* 12 38 .0050 .0065 .131 .135 .140 27.37 28.05
55PC1213-10-* 10 38 .0050 .0065 .154 .159 .164 40.25 41.30
55PC1213-8-* 8 38 .0070 .0090 .219 .231 .243 73.26 75.89
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER,
AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: 901/902.. MAY BE REPLACED BYAxx.) OTHER CODES
AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Raychem, TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks.
Raychem Wire & Cable
501 Oakside Avenue
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL.
Redwood City, CA 94063-3800
Page 1 of 2
Phone: 1-800-227-8816
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
Fax: 1-650-361-6297
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
2005-2015 Tyco Electronics Corporation. All rights reserved.
Page Revision SCD
SPECIFICATION CONTROL DRAWING
2 of 2 B
55PC1213
CABLE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 200C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
CROSSLINKED VERIFICATION: 300 3C for 1 hour
DIELECTRIC WITHSTAND: 1500 volts (rms), 60 Hz
JACKET COLOR: White preferred
JACKET ELONGATION AND TENSILE STRENGTH:
Elongation, 50% (minimum)
2
Tensile Strength, 5000 lbf/in (minimum)
JACKET FLAWS:
Spark Test, 1000 volts (rms)
Impulse Dielectric Test, 6.0 kV (peak)
SHIELD COVERAGE: 85% (minimum)
VOLTAGE WITHSTAND (Post Environmental): 1000 volts (rms), 60 Hz, 1 minute
1/ PART NUMBER:
The in the part numbers on page 1 shall be replaced by color code designators with
a dash separating the component wire color from the jacket color.
Example: AWG 22, white component wire; white jacket:
55PC1213-22-9-9
1/ See footer section on page 1