A switch that is operated by rotation is known as a rotary switch. It consists of a rotating shaft that is connected to a terminal. That terminal is responsible for either setting up or breaking up a connection with other terminals. Rotary switches include diverse switch positions that can be established by pivoting the switch axle in different directions. Places where rotary switches can be used are band selectors present in multi-band radios or multi-speed fans and even on electrical metering equipment as range selectors. Till the early 1970s, these switches were also utilized on TV receivers as channel selectors

Generally, rotary switches find their use at places where there is a demand to operate an enormous number of electrical circuits covering a wide range of voltages, power, and current requirements. Presently they are used in applications as follows:

• Computers
• Instrumentation
• Aircraft equipment
• Communications equipment
• Medical equipment
• Industrial controls

A coded rotary selector switch or a coded rotary switch is very much like the normal rotary switch, however, the output is compiled in binary format to lessen pin requirement. It helps in selecting any one of the several choices.

Now let’s have a look upon the structure of this kind of switches.

A coded rotary switch comprises of "rotor" or a shaft that has a "spoke" or a contact arm that projects out from its surface like a cam. Around the rotor, there are several terminals in a circular arrangement. Each of them provides a contact for the shaft through which any distinctive electrical circuits can be associated. The switch is in a layered framework, thus, allowing the utilization of multiple poles. There is a detent component whose operation is initiated when the switch is moved from one position to another. Hence a coded rotary switch gives more prominent pole and throws abilities than simpler switches do. The detent mechanism, as well as the sensor/contact system, determines the total number of switching combinations that are possible.

The switches that are used presently work upon the principle of the "star wheel" mechanism to offer the switching position. Nylon cams are then mounted behind this component and spring-stacked electrical contacts slide around these cams. The cams are cut at locations where the contact should be closed, to sum up the electrical circuit. Some rotary switches are even client configurable in connection to the number of positions.

So this was all about regarding coded rotary switches. Hope you like this article. Brand that makes them are NKK Switches, Apem, and C&K. Make sure to check them out through their links.

View all the Coded Rotary Switches