A modular connector is a kind of electrical connector for cables and cords used in electrical appliances, like telecommunication equipment, computer networking as well as audio headsets.

Initially, during the 1960s, the modular connector was made for utilization on some Bell System telephone sets. A similar category of them found its use in the simple interconnection of client-provided phone supporter premises hardware to the telephone network. In 1976 the FCC (Federal Communications Commission) mandated an interface registration system where they were popularly called registered jacks. The comfort of earlier presence for planners and convenience prompted an expansion of modular connectors for several other applications. Applications that initially used an expensive and bulkier connector have changed over to modular connectors. Presently the most popular applications of this equipment are Ethernet and telephone.

Nomenclature

A modular connector is more popularly known as RJ connector, Western Jack and Plug and Modular Phone Jack and Plug. The term 'modular connector' came from its initial utilization in modular wiring equipment of telephone components in the 1960s by the Western Electric Company. This includes the 4P4C used in handset connectors and the 6P2C used in telephone lines.

Registered Jack designations depict the wiring and signal utilized for data and voice correspondence at client confronting interfaces of the public switched telephone network. To refer to the physical jack, a registered jack number is used. For example, the 4P4C connector is inaccurately called RJ22 or RJ9. Likewise, the 8P8C connectors are sometimes erroneously known as RJ45. A popular use of these types of connectors is Ethernet over twisted pair.

History

In the middle of the 1960s, some of the first modular telephone connectors came into the market. It was made by AT&T for the line cords of the Trimline telephone as well as for plug-in handset. Driven by the interest for numerous sets in homes with different cord lengths, the Bell System brought customer connectable part telephones and kits which was sold by Phone Center stores. In 1976, these modular connectors were institutionalized broadly in the United States by the FCC's (Federal Communications Commission Registration Interface Program.

Gender

Modular connectors comes in gender.

• Male is the plug.
• Females are the jacks and sockets.

Cords and cables are terminated using plugs. On the other hand, jacks offer a fixed location on the surface of panels, equipment, and walls. Apart from the telephone extension cord, cables having a jack at one end and a modular plug on the other are the rarest. Rather, cables are typically associated utilizing a female to female adapter, consisting of 2 jacks wired back to back.

Modular connectors are constructed to latch together. As soon as the plug gets inserted inside a jack, the plug is locked by a plastic tab such that it can’t be pulled out. To expel the plug, the hooking tab must be discouraged against the plug to clear the locking edge.

This was all we have regarding the modular connector. Hope you liked it. Brands that manufacture them are TE Connectivity, Molex and Amphenol. Make sure to follow them using the links as provided.

View all our High Speed / Modular Connectors