50502-01

Features Applications Rugged industrial case with handle Suitable for testing: Easy-to-read LCD display, simple operation Gas tubes High accuracy peak reading circuit Carbon gaps Wide 10-1000 V test range MOVs Precise auto-sensing shutoff Zener and avalanche diodes Built-in 5-pin socket for in-line resistance Thyristor devices measurement Finished surge protection products 4030-0x - Surge Protector Test Set Description Bourns Model 4030-0x Surge Protector Test Set is a handheld, battery-operated tester designed to measure the clamping voltage and DC breakdown voltage of most surge protective devices. The Model 4030-0x is suitable for testing gas tubes, carbon gaps, MOVs, Zener and avalanche diodes and thyristor devices, both as components and as complete protectors. The Model 4030-0x is a true slow-rise tester because it does not use a pulse transformer. It contains unique test circuitry and a precise 1 mA detector. As soon as 1 mA is conducted through clamping type devices such as MOVs and avalanche diodes, the control circuit removes the test voltage from the output terminals and displays the clamping voltage on the meter. A low energy capacitive circuit will discharge through crowbar type protectors such as gas tubes and carbon blocks, and trigger the detector. The breakdown voltage will be displayed and the test voltage removed. Operation Internal switches for ramp speed circuit types are accessed by removing the back cover. They are to be set for the intended application: 200 V/s for laboratory tests or QC type approvals 1000 V/s for high-speed testing or sorting. (Factory default is 1000 V/s.) Pushing the test button applies a linear ramp to the device under test. Sensing circuitry automatically terminates the test when either the DC breakdown or 1 mA clamping voltage is reached. The test value is maintained on the LCD display until the test button is released. Speci cations Open Circuit Voltage Rate of Rise ......................................................................................................... 200 V/s or 1000 V/s Maximum Tested Output Voltage ........................................................................................................... 1000 V Useable Measuring Range .................................................................................................................... 10-1000 V Test Current for Clamping Devices ........................................................................................................ 1 mA 10 % Test Current for Crowbar Devices ......................................................................................................... >1 A 1 In-line Resistance Measurement ........................................................................................................ <150 ohms (Open is >150 ohms) Operating Temperature .......................................................................................................................... 0 to +50 C Storage Temperature ............................................................................................................................. -10 to +60 C Measurement Accuracy ......................................................................................................................... 0.5 % Power Source ........................................................................................................................................ 2 alkaline batteries - NEMA type 1604A Battery Life (Based on usable reading up to 750 V) Alkaline ............................................................................................................................................ >1,500 tests Lithium ............................................................................................................................................. >3,000 tests Shipping Weight .................................................................................................................................... 3 lbs. Warranty ................................................................................................................................................ 2 years Notes: For P-type thyristor protectors, breakdown voltage V occurs at the device Zener voltage V . Therefore, the tester will measure BO Z actual V . BO For N-type thyristor protectors, breakover voltage V is higher than the Zener voltage V . For these devices, the tester will BO Z measure V . Z 1 Available only when using the 5-pin socket, TIP to TIP , RING to RING in out in out. WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.Additional Features Individual buttons for complete testing between all terminals and polarities Linear voltage ramp, selectable for 200 V/s or 1000 V/s operation Wide range of adapters for standard protector types 4030-0x - Surge Protector Test Set Product Dimensions (Approximate, Rounded up to the Nearest 0.1 Inch) Width .............................................. 8.25 Length............................................. 6.50 Depth .............................................. 3.50 Depth with Lid Open ....................... 9.25 How To Order 4030 - 0X - Y Model Number Designator Tester Con guration 01 = Standard Tester with 800 V (1000 V Max.) 02 = Low Voltage Tester with 200 V (250 V Max.) Mounting Con guration (Blank) = Portable W = Wall Mount / Frame Mount) NOTE: Uses two 9 V NEMA Type 1604A alkaline batteries. Lithium batteries may be used for longer test life. Due to shipping regulations, factory may not install lithium batteries. Please see the manual for battery installation instructions. Part No. Accessories Included Part No. Available Separately 4030-01/ 30503-01 ..............Test Cable w/Alligator Clip 48-inch - Red 4030-02 ................Portable 30503-02 ..............Test Cable w/Alligator Clip 48-inch -Black 2 each P/N 30503-03 30503-03 ..............Test Cable w/Alligator Clip 24-inch - Red 1 each P/N 30503-04 30503-04 ..............Test Cable w/Alligator Clip 24-inch - Black 4030-01-W/ 50502-01 ..............120 Vac to 18 Vdc Adapter 4030-02-W ............Wall Mount (DIN-Rail type) 72288....................Adapter for 2-pole Gas Tubes, Fits 6 and 1 each P/N 50502-01 8 mm diameter Gas Tubes and most Carbon 2 each P/N 30503-03 Block Protectors 1 each P/N 30503-04 72289....................Adapter for 3-pole Gas Tubes with Leads on 4.4, 4.7 and 6.4 mm centers 72292....................1-pin to 5-pin Adapter 72293....................4-pin to 5-pin Adapter REV. B 10/19 Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. L1-C L1-C - + L1-C L1-C - + DANGER HIGH VOLTAGE WARNING DO NOT CONNECT TO ENERGIZED EQUIPMENT T R I I P N G L1 C L2 L1-L2 + RING TIP PEAK VOLTAGE Series Resistance in Ohms (OPEN is > 150 Ohms) Measurement only available throu h the 5 pin socket g - SURGE PROTECTOR TEST SET MODEL 4030-01 L1-L2 -