3M Mini D Ribbon (MDR) Connectors .050 Solder Plug Connector - Shielded 101 Series Wiper-on-wiper contact for reliable repetitive plugging Solder cup termination requires no special tooling Accepts a wide variety of discrete wire (24 to 30 AWG) cable construction Contacts: 14, 20, 26, 36, 40 and 50 See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: June 1, 2008 TS-0669-C Sheet 1 of 2 Physical Glass Reinforced Polyester Insulation Material: Flammability: UL 94V-0 Color: Black Copper Alloy Contact Material: Plating: Underplating: 80 2.0 m Nickel Wiping Area: Gold (see ordering information) Solder Tail Plating: Gold Flash over Nickel (RIA E1 & C1 apply) Steel Shroud Material: Plating: Nickel Wire Accomodation: 24, 26, 28 & 30 AWG Marking: 3M Logo and Part Number Electrical 1 A Current Rating: 8 >1 x 10 at 500 V Insulation Resistance: DC 500 V for 1 minute Withstanding Voltage: RMS Environmental -55C to +105C Temperature Rating: 360C max for 10 sec. max Solder Process: UL File No.: E68080 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions 3M Mini D Ribbon (MDR) Connectors .050 Solder Plug Connector - Shielded 101 Series Dimensions Contact C Quantity A B C 14 .300 7.62 .54 13.8 .72 18.2 20 .450 11.43 .69 17.6 .87 22.0 26 .600 15.24 .85 21.5 1.02 25.8 36 .850 21.59 1.09 27.8 1.27 32.2 40 .950 24.13 1.19 30.3 1.37 34.7 50 1.200 30.48 1.44 36.7 1.62 41.1 20, 36 & 40 Position 14, 26 & 50 Position .100 .09 Last Position 2.54 2.3 .050 Last Position .09 1.27 2.3 Position .20 5.1 .20 Position 1 5.1 Position 3 .11 Position 2 2.9 .76 19.3 .50 .26 12.7 6.6 C Position 2 Position 1 Position 3 Inch Imm Tolerance Unless Noted .0 .00 .000 .30 .36 7.5 9.1 Inch .1 .01 .005 Dimensions for Reference Only .050 1.27 A Last Position Position B Ordering Information 101XX - 3000PX Wiping Interface: C = 30 .76 m Min. Contact Quantity (See Table) gold E = 20 .5 m Min. gold TS-0669-C Sheet 2 of 2 Note: This solder plug connector must be used with only 3M Non-Shielded Shell Kits 103XX-52FO-008 Series and 103XX-52A0-008 Series. 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions