10226-1A10PE 3M

3M Mini D Ribbon (MDR) Connectors .050 Surface Mount Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission Interface latch design for connection stability MDR digital LCD interface Contacts: 26 See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: November 13, 2007 TS-0874-B Sheet 1 of 3 Physical Insulation Material: Glass Reinforced Polyester (PCT) Flammability: UL 94V-0 Color: Beige Contact Material: Copper Alloy Underplating: 80 2.0 m Min. Nickel Wiping Area Plating: 20 0.50m Min. Gold Solder Tail Plating: Gold Flash over Nickel (RIA E1 & C1 apply) Shroud & Latch Hook Material: Steel Plating: Nickel Grounding Flange (Screw Lock) Material: Copper Alloy Plating: Tin Marking: 3M Logo & Part Number Electrical Current Rating: 1 A 8 Insulation Resistance: > 5 10 at 500 V DC 500 V for 1 Minute Withstanding Voltage: RMS Environmental Temperature Rating: -55C to +105C Process Rating: 240C peak temperature for less than 10 secs. after 180C max. preheat for 90 secs. UL File No.: E68080 3M 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call 3M Mini D Ribbon (MDR) Connectors .050 Surface Mount Right Angle Receptacle - Shielded 102 Series 1.50 38.2 position below pos. 1 .625 15.88 .025 0.635 .047 1.20 position 1 .010 nom. 2X M2.5 Thread 0.25 .051 1.30 .450 11.40 .108 2.75 .19 .203 4.8 5.15 .368 2X .138 3.5 .795 20.2 9.35 1.231 31.26 Position 1 2X M2.5 Thread (see note in ordering info) .248 6.30 .189 4.80 Position last position Inch m m Tolerance Unless Noted .0 .00 .000 inch .1 .01 .005 D im ensions for R eference Only Ordering Information 10226-1A10-PE Notes: TS-0874-B Sheet 2 of 3 1. Use (M2.5x8mm) screws to mount to panel with max. thickness of .079 2.0 . 3M 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call