3M Mini D Ribbon (MDR) Connectors .050 Boardmount Compliant Pin Vertical Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Rugged die cast metal case construction Contacts: 14, 20, 26, 36, 40, 50, 68 and 80 See Regulatory Information Appendix (RIA) for chemical compliance information. Date Modified: November 13, 2008 TS-0961-C Sheet 1 of 3 Physical Glass Reinforced Polyester (PBT) Insulation Material: Flammability: UL 94V-0 Color: Black Copper Alloy Contact Material: Plating Underplating: 80 2.0 m Nickel Wiping Area: See Ordering Information Compliant Tails: See Ordering Information Body Material: Zinc Alloy Plating: Nickel Shroud & Latch Hook Material: Steel Plating: Nickel 3M Logo and Part Number Marking: Electrical 1 A Current Rating: 8 Insulation Resistance: > 5 10 at 500 V DC Withstanding Voltage: 500 V for 1 Minute RMS Environmental -20C to +85C Temperature Rating: UL File No.: E68080 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions 3M Mini D Ribbon (MDR) Connectors .050 Boardmount Compliant Pin Vertical Receptacle - Shielded 102 Series Dimension Contact Quantity A B C D E 14 .300 7.62 .93 23.6 1.16 29.5 .50 12.6 .77 19.5 20 .450 11.43 1.08 27.45 1.31 33.4 .65 16.4 .92 23.4 26 .600 15.24 1.23 31.3 1.46 37.2 .80 20.2 1.07 27.2 36 .850 21.59 1.48 37.6 1.71 43.5 1.05 26.6 1.32 33.5 40 .950 24.13 1.58 40.2 1.81 46.1 1.15 29.1 1.42 36.1 50 1.200 30.48 1.83 46.5 2.06 52.4 1.40 35.5 1.67 42.4 68 1.650 41.91 2.28 57.9 2.51 63.8 1.85 46.9 2.12 53.8 80 1.950 49.53 2.58 65.6 2.81 71.5 2.15 54.5 2.42 61.5 .075 1.91 C B .075 A 1.91 .050 1.27 .075 1.91 .016 0.40 .23 .19 .160 5.8 4.8 4.00 D .21 .05 5.2 .05 1.3 1.3 E .28 7.2 Position 2 Position 1 (2X) Lockstand Thread see ordering information below .36 9.1 .25 6.3 .050 .18 1.27 Inch 4.6 Position mm Last Position 15 Tolerance Unless Noted .0 .00 .000 Inch .1 .01 .005 Note: Dimensions for 1. Use mounting screws to PCB when using Junction Shells. Reference Only Ordering Information 102XX - R2XX XX Contact Quantity Wiping Area Plating (See Table) S = 30 0.76 m Min. Gold Lockstand Thread FB = 8 0.2 m Min. Gold PCB Press Fit Hole Compatibility 0 = M2.6 (Special order) with Lubricant Note: C = Cu/pre-flux PCB holes. Contacts with gold 1 = M2.5 (Standard) flash tail plating (App. E1 & C1 apply) 2. Assembly tools: 3M Stopper T = Solder plated PCB holes. Contacts with gold Block 10991-XX and 3M TS-0961-C flash tail plating (App. E1 & C1 apply) Press Block 10992-XX. Sheet 2 of 3 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions