Specialty Terminals W 10-2-WN thru 10-10-WN Ring Tongue, Nylon Insulated E Data Sheet Wire Maximum 3M Product Stud Barrel Range W E Thickness Insulation Number Size I.D. (AWG) Diameter 10-2-WN 26-22 2 0.19 0.55 0.20 0.35 0.09 10-4-WN 26-22 4 0.19 0.55 0.20 0.35 0.09 10-6-WN 26-22 6 0.24 0.63 0.20 0.35 0.09 10-8-WN 26-22 8 0.25 0.63 0.20 0.35 0.09 10-10-WN 26-22 10 0.31 0.63 0.20 0.35 0.09 Specifications Installation Information Wire Size: See Table Above WARNING Barrel Seam: Brazed T urn power off before installing or removing terminal. All electrical Max. Voltage Rating: 600 V Building Wire work should be done according to appropriate electrical codes. 1000 V Signs, Fixtures and Luminaires Max. Operating Temp.: 221F (105C) Strip away the end 3/8 inch of wire insulation. Max. Current: Same as Wire Insulator Material: Nylon Make the crimp in the proper station of a recommended Terminal Material: Copper 3M Scotchlok Crimping Tool TH-450. Plating: Tin Barrel Crimp (Electrical)Engineering Specification Crimp-type terminals shall, electrically and The nylon-insulated, ring tongue terminal shall be mechnically, connect to a pre-stripped end of a tin-plated, annealed copper, with the tongue having a stranded copper wire and have a flat tongue portion specified stud hole (size 2 thru 10) and a brazed seam with a central opening for mounting around a screw or barrel, covered by a molded nylon sleeve, color coded stud. and sized for 26-22 (AWG) wire. The terminal line shall offer tongue variations in hole (stud) size (6, 8 10, etc.) and configuration (ring, fork, block fork, flanged block fork, locking fork, etc.): and barrel variations in wire (AWG) size (24, 22-18, 16-14, 12-10, etc.) and construction (non-insulated brazed seam, vinyl insulated butted seam, nylon insulated with insulation grip, etc.). 3M and Scotchlok are trademarks of 3M Company. Important Notice All statements, technical information, and recommendations related to 3Ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3Ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty Limited Remedy Limited Liability This product will be free from defects in material and manufacture for a period of fiver (5) years from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electrical Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 800-245-3573 Please recycle. Printed in USA. Fax 800-245-0329 3M 2007. All rights reserved. www.3M.com/electrical 78-8131-7367-7-A