3 Double Coated Tapes with Adhesive 200MP 9492MP 9495MP 9495MPF 9495FL 9495B Technical Data August, 2008 Product Description 3M Double Coated Tapes with 3M Adhesive 200MP feature a thin polyester film for dimensional stability and improved handling with ease of die-cutting and laminating. The 3M adhesive 200MP provides exceptional temperature and chemical resistance. 3M Double Coated Tape 9495B has a black polyester film to provide opacity or visibility. Constructions 1,4 2,4 Faceside Backside Total Tape Product Adhesive Carrier Adhesive Liner Color, Liner Thickness Number Type/Thickness Type/Thickness Type/Thickness Type, Print Caliper (w/o liner) 3 3M Double 200MP/ Clear PET 200MP/ Tan, 58 , 0.004 0.0025 Coated Tape 0.001 0.0005 0.001 Polycoated Kraft, (0.10mm) (0.06mm) 9492MP (0.025mm) (0.013mm) (0.025mm) 3M 200MP 3M Double 200MP/ Clear PET 200MP/ Tan, 58 , 0.004 0.0057 Coated Tape 0.0029 0.0005 0.0023 Polycoated Kraft, (0.10mm) (0.14mm) 9495MP (0.074mm) (0.013mm) (0.058mm) 3M 200MP 3M Double 200MP/ Clear PET 200MP/ Clear, PET, 0.002 0.0057 Coated Tape 0.0029 0.0005 0.0023 No Print (0.051mm) (0.14mm) 9495MPF (0.074mm) (0.013mm) (0.058mm) 5 3M Double 200MP/ Clear PET 200MP/ Faceside liner 0.003 0.0050 Coated Tape 0.002 0.001 0.002 Translucent, HDPE (0.076mm)/ (0.13mm) 9495FL (0.051mm) (0.025mm) (0.051mm) Backside liner Tan, 0.004 No Print (0.10mm) 3MDouble 200MP/ Black PET 200MP/ Tan, 58 , 0.004 0.0057 Coated Tape 0.0029 0.0005 0.0023 Polycoated Kraft, (0.010mm) (0.14mm) 9495B (0.074mm) (0.013mm) (0.058mm) 3M 200MP Note 1: Faceside adhesive is on the interior of the roll, exposed when unwound. Note 2: Backside adhesive is on the exterior of the roll, exposed when liner is removed. Note 3: PET (Polyester). Note 4: The caliper listed is based on a calculation from manufacturing controlled adhesive coat weights using a density of 1.012 g/cc. While past data pages have listed a nominal caliper of 4.8 mils for 3M tapes 9495MP, 9495FL and 9495B, the coat weight has not changed. Note 5: Backside liner is primary (stays with die cut part) Faceside is secondary (removed first). 3M Double Coated Tapes with Adhesive 200MP 9492MP 9495MP 9495MPF 9495FL 9495B Note: The following technical information and data should be considered representative or Typical Physical typical only and should not be used for specification purposes. Properties and Performance Product Number 3M Double 3M Double Characteristics Coated Tape Coated Tapes 9492MP 9495MP, 9495MPF, 9495B, 9495FL Adhesion to stainless steel Oz/in Oz/in ASTM D3330 - 90 degree (N/100 mm) (N/100 mm) - 15 minute RT 45 (49) 70 (76) - 72 Hour RT 62 (67) 82 (89) - 72 Hour 158F 69 (75) 92 (100) ASTM D3330 - 180 degree, 2 mil al foil - 72 Hour RT 100 (109) Adhesion to other surfaces* ASTM D3330 90 degree, 2 mil al foil, 72 hours RT ABS 48 (52) 62 (67) Acrylic 55 (60) 60 (66) Polycarbonate 37 (40) 60 (66) Shear Strength ASTM D3654 modified - 2 (.5 inch sample size) 1000 grams at 72F >10,000 min >10,000 min 500 grams at 158F >10,000 min >10,000 min Relative High Temperature Operating Ranges: Long Term (days, weeks) 250F 250F Short Term (minutes, hours) 300F 300F *Not recommended for low energy plastics (polypropylene, polyethylene). For these surfaces, please refer to 3M Adhesive 300, 300LSE, 350 and 300MP. Roll length, width, slitting tolerance, core size. Available Sizes Available Lengths (Subject to Minimum order requirements) Maximum Length 1/4 to 1 144 yd (132 m) 1 to 54 360 yd (329 m) Available Widths Minimum 1/4 (6.35 mm) Maximum 3M Double Coated Tapes 9492MP, 54 (1372 mm) 9495MP, 9495MPF, 9495B 3M Double Coated Tape 9495FL 48 (1219 mm) Normal Slitting Tolerance 1/32 (0.8 mm) Core Size 3.0 (76.2 mm) - 2 -