1350-1, 1350-2 Tape Flame-Retardant Tape with Polyester Film and Acrylic Pressure-Sensitive Adhesive Data Sheet Product Description Applications 3M 1350 Tape is an electrical insulating polyester 3M 1350 Tape is especially suited for applications film tape, which meets the flame-retardancy such as wrapping coils, capacitors, wire harnesses, requirements of UL 510. It consists of materials that transformers, shaded pole motors and fractional are represented in many UL Recognized Insulation horsepower motors. Syatems and has a Ul 130C temperature rating. It also offers excellent flagging and solvent resistance UL and CSA Component Recognition good wet grab smooth, even unwind and is suitable UL Recognized for use at temperature not exceeding for use on automated equipment. 130C, flame retardant per UL Standard 510, UL UL Recognized flame retardant File Number E17385, Product Category AOANZ2. UL Recognized Class 130C/CSA Underwriters Laboratories (UL) Recognized Excellent Flagging Resitant products are evaluated for use as components of Printable end-product equipment that is Listed or Classified Solvent resistant without thermosetting by UL. To achieve Underwriters Laboratories Excellent shelf life Recognition, component construction must meet UL specifications and conditions of acceptability for proper and safe use of the component products, 3M Colors Flame Retardant Tape with Polyester Film and 3M 1350 Tape is available in yellow, white and black. Acrylic Pressure Sensitive Adhesive. Typical Properties 1-mil Film 2-mil Film Adhesive Acrylic Acrylic Backing Polyester Film Polyester Film 1 Backing Thickness One mil (25 micron) Two mils (50 micron) 1 Total Thickness 2.5 mils / 0,063 mm 3.5 mils / 0,088 mm Colors Yellow, White, Black Yellow, White, Black Temperature Class 130C (266F) 130C (266F) 1 Dielectric Breakdown 5500 Volts 7,000 Volts 1 6 6 Insulation Resistance (megohms) >1 x 10 >1 x 10 1 Breaking Strength 25 lbs. / in (44 N/10mm) 50 lbs. / in(88N/10mm) 1 Elongation (% at break) 100 110 3 Electrolytic Corrosion Factor 1.0 1.0 1 Adhesion to Steel 30 oz/in (3,3N/10mm) 30 oz/in (3,3N/10mm) 2 UL 510 Flame Retardant Yes Yes Printable Yes Yes Note: Typical properties are not recommended for specification purposes. Product specifications will be provided upon request. Footnote: 1 Test Method ASTM D 1000 2 UL-recognized for flame retardancy per UL510, Product Category OANZ2, File E17385 3 3M Test Method-Available on request3M is a trademark of 3M IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.