3M Mini D Ribbon (MDR) Cable Assembly
.050" High Speed Digital Data Transmission System - 26 to 26 Pos. 14526-EZ8B-XXX-07C
Solution for Digital Displays, Datacom and
Telecom applications
Supports LVDS FPD Link, FlatLink,
ChannelLink, PanelLink/TMDS
electrical interfaces
Each differential twin-ax pair has a foil shield
and drain
Entire cable bundle is shielded with foil and
braid for additional signal protection
Rugged MDR ribbon type contact
Quick release latches
RoHS* compliant
Date Modified: May 15, 2006
TS-0757-17
Sheet 1 of 4
Physical
Connector Contact Plating
Wiping Area:
30" [ 0.76m ] Min. Gold
Shell Color:
Beige
Shell Material:
Acrylonitrile Butadiene Styrene (ABS)
Cable Color:
Beige
Cable Jacket Material:
Polyvinyl Chloride (PVC)
CableFlammability:
AWM VW-1
Electrical
Voltage Rating:
30 V
Current Rating:
1 A
8
Insulation Resistance:
> 1 10 at @100 Vdc
Withstanding Voltage: 350 Vrms for 1 minute
Individually Shielded Twisted Pairs
Characteristic Impedance:
100 10
Conductor Size: 28 AWG Stranded
Propogation Velocity:
1.25 ns/ft [4.1 ns/m ]
Environmental
Temperature Rating:
-20C to +75C
*RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic EquipmentRoHS complian means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
FPD Link is a registered trademark of National Semiconductor Inc.
PanelLink and TMDS are trademarks of Silicon Image, Inc.
FlatLink is a trademark of Texas Instruments, Inc.
ChannelLink is a trademark of Computer Network Technology Corp.
UL File No.: E86982
3M
3M is a trademark of 3M Company.
Interconnect Solutions For technical, sales or ordering information call
3M Mini D Ribbon (MDR) Cable Assembly
.050" High Speed Digital Data Transmission System - 26 to 26 Pos. 14526-EZ8B-XXX-07C
26 Position High Density 26 Position High Density
Mini D Ribbon (MDR) Mini D Ribbon (MDR)
Male Plug Male Plug
Cable
(See wiring diagram for cable construction)
2X Squeeze Release
2X Squeeze Release
Latches
Latches
41.9 41.9
LENGTH
1.7 1.7
(See ordering information)
33.5
1.3
12 34 5 6 7 89 10 11 12 13
11.5
0.5
14 15 16 17 18 19 20 21 22 23 24 25 26
MDR 26 Position Plug
( Both Ends )
mm
[Inch]
Tolerance Unless Noted
Assembly Length Tolerance
0.00
0.0
mm .1 .10
Cable Length:
0.5 to 1.5 meters -0 + .05 meters
[ ] Dimensions for
Reference only
2 to 10 meters -0 +3% of length
Ordering Information
14526-EZ8B-XXX-07C
Length Length
060 = 0.61 meter (2 ft.) 050 = 0.5 meter
100 = 1 meters 150 = 1.5 meters
200 = 2 meters 250 = 2.5 meters
300 = 3 meters 350 = 3.5 meters
500 = 5 meters 400 = 4 meters
A00 = 10 meters 450 = 4.5 meters
600 = 6 meters
700 = 7 meters
800 = 8 meters
Notes:
900 = 9 meters
1. USB/DDC Gnd grounding pins for USB and DDC are not commoned in the cable
assembly. The end user must specify proper grounding at the board level.
TS-0757-17
2. Contact 3M for polarization key system. Sheet 2 of 4
3M
3M is a trademark of 3M Company.
Interconnect Solutions
For technical, sales or ordering information call