3M Mini D Ribbon (MDR) Cable Assembly .050 High Speed Digital Data Transmission System - 26 to 26 Pos. 14526-EZ8B-XXX-07C Solution for Digital Displays, Datacom and Telecom applications Supports LVDS FPD Link, FlatLink, ChannelLink, PanelLink/TMDS electrical interfaces Each differential twin-ax pair has a foil shield and drain Entire cable bundle is shielded with foil and braid for additional signal protection Rugged MDR ribbon type contact Quick release latches RoHS* compliant Date Modified: May 15, 2006 TS-0757-17 Sheet 1 of 4 Physical Connector Contact Plating Wiping Area: 30 0.76m Min. Gold Shell Color: Beige Shell Material: Acrylonitrile Butadiene Styrene (ABS) Cable Color: Beige Cable Jacket Material: Polyvinyl Chloride (PVC) CableFlammability: AWM VW-1 Electrical Voltage Rating: 30 V Current Rating: 1 A 8 Insulation Resistance: > 1 10 at 100 Vdc Withstanding Voltage: 350 Vrms for 1 minute Individually Shielded Twisted Pairs Characteristic Impedance: 100 10 Conductor Size: 28 AWG Stranded Propogation Velocity: 1.25 ns/ft 4.1 ns/m Environmental Temperature Rating: -20C to +75C *RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic EquipmentRoHS complian means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or prolybromianted diphenyl ethers or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M s knowledge and belief based upon information provided by third party suppliers to 3M. FPD Link is a registered trademark of National Semiconductor Inc. PanelLink and TMDS are trademarks of Silicon Image, Inc. FlatLink is a trademark of Texas Instruments, Inc. ChannelLink is a trademark of Computer Network Technology Corp. UL File No.: E86982 3M 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call 3M Mini D Ribbon (MDR) Cable Assembly .050 High Speed Digital Data Transmission System - 26 to 26 Pos. 14526-EZ8B-XXX-07C 26 Position High Density 26 Position High Density Mini D Ribbon (MDR) Mini D Ribbon (MDR) Male Plug Male Plug Cable (See wiring diagram for cable construction) 2X Squeeze Release 2X Squeeze Release Latches Latches 41.9 41.9 LENGTH 1.7 1.7 (See ordering information) 33.5 1.3 12 34 5 6 7 89 10 11 12 13 11.5 0.5 14 15 16 17 18 19 20 21 22 23 24 25 26 MDR 26 Position Plug ( Both Ends ) mm Inch Tolerance Unless Noted Assembly Length Tolerance 0.00 0.0 mm .1 .10 Cable Length: 0.5 to 1.5 meters -0 + .05 meters Dimensions for Reference only 2 to 10 meters -0 +3% of length Ordering Information 14526-EZ8B-XXX-07C Length Length 060 = 0.61 meter (2 ft.) 050 = 0.5 meter 100 = 1 meters 150 = 1.5 meters 200 = 2 meters 250 = 2.5 meters 300 = 3 meters 350 = 3.5 meters 500 = 5 meters 400 = 4 meters A00 = 10 meters 450 = 4.5 meters 600 = 6 meters 700 = 7 meters 800 = 8 meters Notes: 900 = 9 meters 1. USB/DDC Gnd grounding pins for USB and DDC are not commoned in the cable assembly. The end user must specify proper grounding at the board level. TS-0757-17 2. Contact 3M for polarization key system. Sheet 2 of 4 3M 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call