14B26-SZLB-200-OLC 3M

3M Mini D Ribbon (MDR) Cable Assembly .050 High Speed Digital Data Transmission System - 26 Position 14X26-SZLB-XXX-0LC Supports Industrial CameraLink in Automated Imaging Association for camera to frame grabber communications 11 shielded twin-ax pairs and four drain wires Entire cable bundle is shielded with foil and braid for additional signal protection Rugged MDR ribbon type contact Rugged thumbscrew retention EMI shielded junction shell in either plastic or overmolded construction See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.3Mconnector.com for compliance information (RIA E1 & C1 apply) Date Modifi ed: May 18, 2011 TS-1001-C Sheet 1 of 4 Physical Connector Contact Plating Wiping Area: 30 0.76 m Min. Gold Shell Color: Beige Shell Material: Overmold Option: Polyvinyl Chloride (PVC) Shell Kit Option: Polyester Elastomer Cable Color: Beige Cable Jacket Material: Polyvinyl Chloride (PVC) Cable Flammability: AWM VW-1 Electrical Voltage Rating: 30 V 1 A Current Rating: 8 > 1 10 at 100 V Insulation Resistance: DC 350 V for 1 minute Withstanding Voltage: rms Individually Shielded Twisted Pairs Characteristic Impedance: 100 10 Conductor Size: 28 AWG Stranded Propogation Velocity: 1.25 ns/ft 4.1 ns/m Skew (within pair): 50 ps/meter maximum Skew (channel skew per chipset): 50 ps/meter maximum Environmental Temperature Rating: -20C to +75C UL File No.: E86982 CameraLink is a trademark of the Automated Imaging Association. 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions 3M Mini D Ribbon (MDR) Cable Assembly .050 High Speed Digital Data Transmission System - 26 Position 14X26-SZLB-XXX-0LC Discrete 4 - 40 Thumbscrew Shell Kit 26 Position High Density 26 Position High Density Mini D Ribbon (MDR) Mini D Ribbon (MDR) Male Plug Male Plug Cable (See pinout for cable construction) B Version 2X 2X Thumbscrews Thumbscrews 32.5 32.5 LENGTH 1.28 1.28 (See ordering information) Overmold 4 - 40 Thumbscrew Shell 26 Position High Density 26 Position Mini D Ribbon (MDR) High Density Male Plug Mini D Ribbon (MDR) Male Plug Cable (See pinout for cable construction) T Version 2X 2X Thumbscrew Thumbscrew 45.7 45.7 LENGTH 1.8 1.8 (See ordering information) mm Inch Assembly Length Tolerance Tolerance Unless Noted Cable Length Tolerance 0.0 0.00 0.5 to 1.5 meters -0 + .05 meters mm .1 .01 Dimensions for 2 to 10 meters -0 +3% of length TS-1001-C Reference only Sheet 2 of 4 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions