14H26-SZLM-200-0LC 3M

3M Mini D Ribbon (MDR) Cable Assembly .050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC Supports Industrial Camera Link standard for camera to frame grabber communications Space-saving right angle cable exit 11 shielded twin-ax pairs and four drain wires Entire cable bundle is shielded with foil and braid for additional signal protection Rugged MDR ribbon type contact Rugged thumbscrew retention EMI shielded junction shell on straight end EMI shielded overmolded shell on right-angle end See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: January 20, 2009 TS-2262-C Sheet 1 of 3 Physical Connector Contact Plating: Wiping Area: 30 [0.76 m] Min. Gold (RIA E1 & C1 apply) Overmolded Shell: Color: Black Material: Polyvinyl Chloride (PVC) Shell: Color: Beige Material: Polyester Elastomer Cable: Color: Beige Jacket Material: Polyvinyl Chloride (PVC) Flammability: AWM VW-1 Electrical Voltage Rating: 30 V 1 A Current Rating: 8 Insulation Resistance: > 1 x 10 at 100 V DC 350 V for 1 minute Withstanding Voltage: RMS Individually Shielded Twisted Pairs 100 10 Characteristic Impedence: 28 AWG Stranded Conductor Size: 1.25 ns/ft [4.1 ns/m ] Propagation Velocity: 50 ps/meter maximum Skew (within pair): Skew (channel skew per chipset): 50 ps/meter maximum Environmental -20C to +75C Temperature Rating: UL File No.: E86982 Camera Link is a certification mark of Automated Imaging Association. 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions 3M Mini D Ribbon (MDR) Cable Assembly .050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC Right-Angle End Straight End 39.7 39.7 [1.56] [1.56] #4-40 19.4 Thumbscrews [0.76] 2X 26 Position High Density Mini D Ribbon (MDR) Male Plug 12.8 [0.51] Cable Length 42.4 32.5 [1.67] [1.28] Cable Length Tolerance is the Larger of +50mm / -0mm or +3% / -0% MDR 26 Position Plug Right-Angle End MDR 26 Position Plug Straight End 13 1 14 26 14H26-SZLM-XXX-0LC 14H26-SZLS-XXX-0LC mm [Inch] Tolerance Unless Noted 0.0 0.00 mm .1 .01 Use 3M Jacketsocket 3341-31 for mounting receptacle to panel. [ ] Dimensions for Reference Only Ordering Information 14H26 - SZLX - XXX - 0LC Right-Angle Orientation M = Position 1 opposite cable Cable Length S = Position 1 on cable side 050 = 50 cm 300 = 300 cm 600 = 600 cm 100 = 100 cm 350 = 350 cm 700 = 700 cm 150 = 150 cm 400 = 400 cm 800 = 800 cm 200 = 200 cm 450 = 450 cm 900 = 900 cm 250 = 250 cm 500 = 500 cm A00 = 1000 cm TS-2262-C For lengths greater than 1000 cm refer to Table 2. Sheet 2 of 3 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions