3M MetPak 2-FB Power Socket 2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series 6.50 Amps per contact End-to-end stackable Press or heat stake peg (solder tail) Futurebus+ compatible See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: February 14, 2017 TS-1125-E Sheet 1 of 4 Physical Insulation: Material: High Temperature LCP Flammability: UL 94V-0 Color: Beige Contact: Material: Copper Alloy Plating: Underplating: 50 1.27 m Nickel Wiping Area: See Ordering Information Tails: See Ordering Information Electrical Power: 6.50 A per power socket contact at 70C Current Rating: 3 10 M Insulation Resistance: 1,500 V for 60 seconds Withstanding Voltage: AC Environmental -55 C to 125 C Temperature Rating: 260C (Profile per J-STD-020C) Process Temperature Rating: 1 (per J-STD-020C) Moisture Sensitivity Level: UL File No.: E68080 Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE) 3M and MetPak are trademarks of 3M Company. 3 For technical, sales or ordering information call Electronics Materials Solutions Division 800-225-5373 Interconnect Solutions 3M MetPak 2-FB Power Socket 2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series 21.0 .83 11.95 .470 12.45 .490 9.30 .366 11.80 TAIL LENGTH .465 3.00 13.50 .118 .531 POSITION 2 POSITION 1 2.00 6.00 .079 .236 TYP. 2.00 5X .079 10.00 .394 9.50 .374 4 ROW PRODUCT FOR SPECIAL MONOBLOCKS CONTACT 3M SALES REPRESENTATIVE 23.0 .91 12.45 mm .490 (Inch) ROW Tolerance Unless Noted E 11.30 0 0.0 0.00 D .445 13.80 C mm 3 0.3 0.13 .543 B ( ) Dimensions used for A Reference Only 5 ROW PRODUCT 8.00 .315 Note: 1. Refer to IEC 61076-4-104 Futurebus+ global standard. 2. Press Fit describes a contact tail having a compliant section designed to make a reliable electrical connection with a plated through-hole (PTH) in a printed circuit board, typically a back plane. Ordering Information MP2-SPXX-X1XX- XXXXX SP = Power Socket Plating Options: Contact Count (See Table 3) (See Table 1) Rows Tail Length 4 = 4 Rows (See Table 2) 5 = 5 Rows Termination Style P = Press-Fit M = Solder Tail (Press Peg) TS-1125-E Sheet 2 of 4 3M and MetPak are trademarks of 3M Company. 3 For technical, sales or ordering information call Electronic Materials Solutions Division 800-225-5373 Interconnect Solutions