8 7 6 5 4 3 2 1 NOTES TM 3M LATCH/EJECT HEADER, 1552 SERIES 1. MATERIAL: PLASTIC: 2MM X 2MM STRAIGHT & RIGHT ANGLE, THROUGH-HOLE, STRAIGHT & SURFACE MOUNT GLASS FILLED POLYESTER (LCP) UL94V-0, BLACK CONTACT: COPPER ALLOY. 2. PLATING: 50 NICKEL UNDERPLATING WIPE AREA: SEE ORDERING INFO. SOLDER TAIL: 200 MATTE TIN. 3 IN THE EVENT OF CONFLICT .44 .29 D .22 D BETWEEN THIS DATA AND THAT 11.1 CONTAINED IN THE PRODUCT 7.4 5.5 SPECIFICATION, THE PRODUCT .73 SPECIFICATION TAKES PRECEDENT59 .59 4. REGULATORY INFORMATION: 18.5 VISIT 3M.com/regs OR CONTACT 15.0 15.0 YOUR 3M REPRESENTATIVE TO FIND THE RoHS COMPLIANCE STATUS OF THE 3M PART YOU ARE INTERESTED IN. 5 SEE TABLE 1 FOR LATCH .31 AVAILABILITY18 4.6 7.9 MATING COMPATIBILITY SERIES: .18 4.6 6. 1552XX-X40X 1522, 870, 2M AND 2MM SCI 5 LATCH MATING FOR CARRIER (93XX). 1552XX-X20X 2MM SCI CARRIER 5 1552XX-X30X 5 SURFACE MOUNT VERSION: 7 LATCH MATING FOR LATCH MATING FOR ORDER CODE APPLIES TO THE MOLDED-ON SOCKET PRESS-ON SOCKET TAPE AND REEL WIDTH. WITH LATCHING EAR * 14 PIN COUNTS RANGING FROM 06 TO 50 POSITIONS. * LATCH/EJECT MECHANISM SECURELY LATCHES TO SOCKET. C C * ROLL PINS RETAIN LATCHES TO BODY IN SHIPPING AND HIGH VIBRATION ENVIRONMENTS. 3 ELECTRICAL PERFORMANCE: * EJECTOR HELPS MAKE UNMATING OF CABLE ASSEMBLIES CURRENT RATING: 4.75A, 1 LINE POWERED EASIER. 2.00A, 6 ADJACENT LINES POWERED * HIGH TEMPERATURE INSULATORS SUITABLE FOR LEAD FREE 1.25A, ALL LINES POWERED PROCESSING. * ROBUST SYSTEM SOLUTION WHEN USED WITH 3M IDC RATING CONDITIONS: EIA-364-070 METHOD 2, 30 C MAXIMUM TEMPERATURE WIREMOUNT SOCKETS OR 3M MOLDED CABLE ASSEMBLIES. RISE, 20% DERATED. REFERENCE APPROPRIATE 3M PRODUCT * SMT LATCH/EJECT HEADERS ARE AVAILABLE IN TAPE AND SPECIFICATION FOR DETAILED CURRENT DERATING CURVES. 9 REEL WITH VACUUM CAP FOR AUTOMATIC PLACEMENT. INSULATION RESISTANCE: > 1X10 OHMS AT 500 V DC WITHSTANDING VOLTAGE (1552XX): 1000 V AT SEA LEVEL RMS WITHSTANDING VOLTAGE (G1552XX): 750 V AT SEA LEVEL RMS 3 ENVIRONMENTAL: TEMPERATURE RATING: -55 C TO +105 C PROCESS RATING: MAXIMUM 260 C (PER J-STD-020) MOISTURE SENSITIVITY LEVEL: 1 (PER J-STD-020) DIM008 .20 DIM006 DIM. 7 DIM15 B B .079 TABLE 1 2.00 CONTACT LATCH TAPE ORDER CONTACT DIM. DIM. DIM247 QTY. OPTION WIDTH CODE QTY. 6.27 06 .673 17.09 .157 4.00 .333 8.45 2, 4 44 MM WD 06 08 .752 19.10 .236 6.00 .411 10.44 2, 4 44 MM WD 08 10 .831 21.10 .315 8.00 .490 12.45 2, 3, 4 44 MM WD 10 .163 4.14 .079 2.00 12 .910 23.10 .394 10.00 .569 14.45 3, 4 44 MM WD 12 TYP. 16 1.067 27.10 .551 14.00 .726 18.44 2, 4 56 MM WE 16 20 1.224 31.09 .709 18.00 .884 22.45 2, 3, 4 56 MM WE 20 POSITION 1 22 1.303 33.10 .787 20.00 .963 24.46 2, 4 56 MM WE 22 .26 ORIENTATION 24 1.382 35.10 .866 22.00 1.041 26.44 2, 4 56 MM WE 24 TRIANGLE 6.7 26 1.461 37.10 .945 24.00 1.120 28.45 2, 3, 4 72 MM WF 26 L 58601 AUG 11,2016 JNC RS 30 1.618 41.10 1.102 28.00 1.278 32.46 2, 4 72 MM WF 30 8-11-16 ADD SHT 4 34 1.774 45.09 1.260 32.00 1.435 36.46 2, 4 72 MM WF 34 .425 REVISE TRADEMAKE NOTE 40 2.012 51.10 1.496 38.00 1.671 42.44 2, 3, 4 72 MM WF 40 JUN 01,2016 DIMENSIONS: MM INCHES 10.80 44 2.169 55.09 1.654 42.00 1.829 46.46 2, 3, 4 88 MM WG 44 PRODUCTION RELEASE, APR 29,2016 50 2.405 61.09 1.980 48.00 2.065 54.45 2, 3, 4 88 MM WG 50 DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD ACCESS DRFT DATE MFG DATE CODES CASTIGLIONE JAN 21,2015 CHKD DATE APPVL DATE R. SCHERER JAN 21,2015 A A DIVISION DIVISION CODE C 3M COPYRIGHT 2017 3M Center EMSD This document and the information it contains are 3M property and may not be reproduced or further St. Paul, SCALE TOLERANCES DO NOT distributed without 3M permission, or used or .020 SQ. EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 4 SCALE All rights reserved. NOTED 1 DRAWING TITLE 0.51 INCHES .0 TYPICAL CONNECTOR DIMENSIONS 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION LATCH/EJECT HEADER, .00 .01 TYP. FOR THE HEADERS ON THIS DRAWING INTERCONNECT SOLUTIONS .000 .008 2MM, STRAIGHT, RIGHT (EXCEPT AS NOTED) THIRD ANGLE PROJECTION .0000 8 7 6 5 4 3 2 1 TM 3M LATCH/EJECT HEADER, 1552 SERIES 2MM X 2MM STRAIGHT & RIGHT ANGLE, THROUGH-HOLE, STRAIGHT & SURFACE MOUNT STRAIGHT VERSION WITH INTERSTITIAL GROUNDS STRAIGHT VERSION D D .039 1.00 .15 3.8 .148 .010 0.25 3.75 CENTER GROUND .15 3.8 .080 .010 .010 DIM006 .006 DIM039 0.25 2.03 DIM25 .010 DIM. 0.15 DIM15 1.00 CENTER GROUND SEE ORDERING DIM25 .006 DIM. INFO. TYP. SEE ORDERING DIM15 INFO C C .006 DIM. DIM15 DIM006 .15 DIM079 .003 .787 .003 .079 0.08 2.00 20.00 2.00 0.08 TYP032 .003 TYP787 0.08 0.81 .039 .003 .003 .079 20.00 AFTER PLATING 0.08 1.00 2.00 0.08 TYP079 .003 TYP. 0.08 .079 .003 2.00 0.08 2.00 .036 .003 RECOMMENDED PC BOARD PATTERN (VIEWED FROM CONNECTOR SIDE) 0.08 0.91 .003 .039 AFTER PLATING TYP036 .003 1.00 0.08 0.08 0.91 B B RECOMMENDED PC BOARD PATTERN AFTER PLATING (VIEWED FROM CONNECTOR SIDE) TYP. ORDERING INFORMATION ORDERING INFORMATION 1552XX-6X0X-XX G1552XX-6X0X-XX CONTACT QUANTITY: PLATING OPTIONS: PLATING OPTIONS: CONTACT QUANTITY: RB = 30 IN .76 m GOLD RB = 30 IN .76 m GOLD LATCHING OPTIONS: RA = 10 IN .25 m GOLD LATCHING OPTIONS: RA = 10 IN .25 m GOLD 2 = LATCH, MOLDED-ON SOCKET WITH (RIA E1 & C1 APPLY) FOR 4 = LATCH, 2MM SCI CARRIER ONLY, (RIA E1 & C1 APPLY) FOR LATCHING EARS, SERIES: 870, 2MM BOTH PLATINGS SERIES 93XX BOTH PLATINGS L 58601 AUG 11,2016 JNC RS 3 = LATCH, PRESS-ON SOCKET, SERIES: 1522 8-11-16 ADD SHT 4 4 = LATCH, 2MM SCI CARRIER ONLY, SOLDER TAIL LENGTH: SOLDER TAIL LENGTH: SERIES: 93XX REVISE TRADEMAKE NOTE DIMENSION JUN 01,2016 DIMENSION 2 = .112 2.84 2 = .112 2.84 PRODUCTION RELEASE, 3 = .155 3.94 APR 29,2016 DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD ACCESS DRFT DATE MFG DATE CODES CASTIGLIONE JAN 21,2015 CHKD DATE APPVL DATE R. SCHERER JAN 21,2015 A A DIVISION DIVISION CODE C 3M COPYRIGHT 2017 3M Center EMSD This document and the information it contains are 3M property and may not be reproduced or further St. Paul, SCALE TOLERANCES DO NOT distributed without 3M permission, or used or EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 4 SCALE All rights reserved. NOTED 1 DRAWING TITLE INCHES .0 LATCH/EJECT HEADER, .00 .01 .000 .008 2MM, STRAIGHT, RIGHT THIRD ANGLE PROJECTION .0000 MILLIMETERS INTERPRET PER ANGLE & SMT ASME Y14.5 - 2009 0 .0 .3 CAGE SIZE DRAWING NO. REV. MAX SURFACE ROUGHNESS .00 .20 NUMBER ALL SURFACES .000 78-5100-2199-7 L MODEL DET. MARKED ONLY ANGLES 1552 YES NO SHT 2 OF 4 LISTS 8 7 6 5 4 3 2 1 78-5100-2199-7 L DRAWING NUMBER REVISION Imaged: L.6 Central Standard Time5/17/2017UTC Offset