W Specialty Terminals C L 14-10S-W thru 16-500S-W E Ring Tongue, Non-Insulated, Brazed Seam Data Sheet Wire Range Stud Barrel Barrel Product Number (AWG) SWize C L E Thickness Length I.D. 184-10S-W 17000.405.402.900.701.05 05.3 0.17 184-14S-W 00.4705.402.900.701.05 05.3 0.17 184-56-W 05.5906.417.000.701.05 05.3 0.17 184-38-W 05.5906.417.000.701.05 05.3 0.17 184-716S-W 09.8101.610.410.001.05 05.3 0.17 184-500-W 13.1311.014.910.301.05 05.3 0.17 184-500S-W 09.8101.610.410.001.05 05.3 0.17 184-58-W 12.1310.013.910.301.05 05.3 0.17 165-10S-W 17002.404.511.100.909.05 00.3 0.25 165-14S-W 02.4704.511.100.909.05 00.3 0.25 165-56-W 02.6302.511.200.909.05 00.3 0.25 165-38-W 02.6302.511.200.909.05 00.3 0.25 165-716S-W 03.8102.612.410.009.05 00.3 0.25 165-500S-W 03.8102.612.410.009.05 00.3 0.25 165-58-W 12.1317.011.910.409.05 00.3 0.25 146-10-W 18003.604.510.315.007.07 00.4 0.28 146-14-W 03.6804.510.315.007.07 00.4 0.28 146-56-W 03.6804.510.315.007.07 00.4 0.28 146-38-W 03.6804.510.315.007.07 00.4 0.28 146-716S-W 03.6804.510.315.007.07 00.4 0.28 146-500S-W 03.6804.510.315.007.07 00.4 0.28 CANADIAN STANDARDS UNDERWRITERS ASSOCIATION LABORATORIES STANDARD NO. C22.2 STANDARD NO. UL 486A NO. 0. 65 3M FILE NO. E23438 3M FILE NO. LR22190Specifications Engineering Specification Wire Size: See Table Above Crimp-type terminals shall, electrically and mechnically, Barrel Seam: Brazed connect to a pre-stripped end of a stranded copper wire Max. Current: Same as Wire and have a flat tongue portion with a central opening for Terminal Material: ETP Copper mounting around a screw or stud. Terminal Plating: Tin The terminal line shall offer tongue variations in hole (stud) size (10, 1/4 in., 5/16 in., etc.) and configuration (ring, fork, block fork, flanged block fork, locking fork, etc.): and barrel variations in wire (AWG) size (22-18, Installation Information 16-14, 12-10, etc.) and construction (non-insulated brazed seam, vinyl insulated butted seam, nylon insulated with WARNING insulation grip, etc.). The terminal line shall have Turn power off before installing or removing terminal. All electrical regulatory agency coverage (UL Listing, CSA work should be done according to appropriate electrical codes. Certification). The terminal tongue shall be marked with the wire range and manufacturers symbol ( ). UL Listed and CSA Certified for use on stranded copper (AWG) wire only. The non-insulated, brazed seam ring tongue terminal shall Strip away wire insulation: be tin-plated, annealed copper, with the tongue having a AWG Length specified stud hole (size 10 thru 5/8 in.) and a brazed seam 8 1/2 barrel with a beveled I.D. for ease of stranded wire entry, 6 9/16 sized for a specified (AWG) wire range (8, 6, 4). 4 5/8 Make the crimp in the proper station of a recommended Non-insulated terminals shall be UL Listed and CSA 3M crimp tool: TH-450 (scissor style) hand tool, Certified. Thomas & Betts WT 115A, or Burndy MY29-3 tools. Barrel Crimp (Electrical) 3M is a trademark of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.