3M Shrunk Delta Ribbon (SDR) Cable Assembly .80 mm Digital Camera Cable, PoCL Compatible, 26 position 1SD26-X1XX-00C-XXX Carries power in addition to signal to enable use in base configuration Power over Camera Link (PoCL) applications Connects to Mini-Camera Link style (SDR) I/O ports on both PoCL camera and PoCL framegrabber Both straight and right angle cable exit available 3 shielded quads and 6 unshielded twisted pairs Entire cable bundle shielded with foil and braid for additional signal protection Rugged ribbon type contact for reliable, repeatable connectivity Thumbscrew retention EMI shielded end-to-end for reduced emissions See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: November 21, 2008 TS-2287-A Sheet 1 of 3 Physical Connector Contact Plating: Wiping Area: 30 0.76 m Min. Gold (RIA E1 & C1 apply) Underplating: 100 2.54 m Nickel Overmolded Shell: Color: Black Material: Polyvinyl Chloride (PVC) Cable: Color: Gray or Black Jacket Material: Polyvinyl Chloride (PVC) Flammability: AWM VW-1 Electrical 30 V Voltage Rating: 0.5 A Current Rating: 8 Insulation Resistance: > 1 x 10 at 100 V DC 125 V for 1 minute Withstanding Voltage: AC (RMS) Twisted Pairs Cable Characteristic Impedence: 100 10 differential 28 AWG Stranded Conductor Size: 50 ps/meter maximum Skew (within pair): 100 ps/meter maximum, 50 ps/meter maximum for 1SD26-R1XX-00C-XXX Skew (Channel skew per chipset): Environmental Temperature Rating: 0C to +70C UL File No.: E86982 Camera Link is a certification mark of Automated Imaging Association. 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions 3M Shrunk Delta Ribbon (SDR) Cable Assembly .80 mm Digital Camera Cable, PoCL Compatible, 26 position 1SD26-X1XX-00C-XXX CN-2 CN-1 CAMERA FRAME GRABBER 14 1 13 26 24.4 24.4 0.96 0.96 26 13 1 14 Connector Label 4X M2.0 ) Thumbscrews (Camera Side 2X 26 Position High Density SDR Plug 9.0 9.0 0.35 0.35 32.0 Cable Length 32.0 1.26 1.26 Cable Length Tolerance is the Larger of +50mm / -0mm or +3% / -0% Figure 1 Straight SDR - Straight SDR 1SD26-X120-00C-XXX CN-2 CN-1 CAMERA FRAME GRABBER 13 26 24.4 24.4 0.96 0.96 16.7 1 14 0.66 2X M2.0 Connector Label 2X M2.0 Screws (Camera Side ) Thumbscrews 26 Position High Density 26 Position Right Angle SDR Plug High Density SDR Plug 9.0 18.2 0.35 mm 0.72 Inch 30.7 Cable Length 32.0 Tolerance Unless Noted 1.26 1.21 0.0 0.00 9.5 Cable Length Tolerance is the Larger of +50mm / -0mm mm .1 .01 0.37 +3% / -0% Dimensions for Reference Only Figure 2 Straight SDR - Right-Angle SDR 1SD26-X13X-00C-XXX Figure 3 Figure 4 Figure 5 1SD26-X136-00C-XXX 1SD26-X137-00C-XXX SDR 26 Position Plug TS-2287-A Sheet 2 of 3 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions