Product Data Sheet 3M Moisture Barrier Bag Dri-Shield 2000 Product Data Sheet 3M Cushioned Shielding Bag 2120R The Cushion Shielding Bag 2120R protects devices from physical damage as well as Physical Typical Values Testing Method provides static shielding. They also offer a heat sealable inner surface. Thickness 260 mils, 6.6 mm +/- 15% ASTM D1596 Tensile Strength 6469 PSI, 44.57 MPa ASTM D882 3M Cushioned Shielding Bag 2120R Puncture Resistance 15 lbs, 67 N MIL-STD-3010C Method 2065 Seal Strength 5 lbs, 22 N ASTM D882 Contact Corrosivity Pass MIL-STD-1003 Method 3005 Electrical Typical Values Testing Method 11 Surface Resistance <1x10 ohms ANSI/ESD STM11.11 Interior 11 Surface Resistance <1x10 ohms ANSI/ESD STM11.11 Exterior Open Top Bag ESD Shielding <10 nJ ANSI/ESD STM11.31 OPENING Heat Sealing Conditions Typical Values (if applicable) OFFSET Width is measured from inside seam to inside seam. Temperature 300F 350F, 149C 177C Length is measured from the Time 2 4 seconds top edge to the bottom fold. SEAL Pressure 30 60 PSI, 207 414 KPa Opening is in the width dimension. LENGTH FOLD WIDTH SEAL WIDTH Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset 0 to 0.250 Seal width +/- 0.125Product Data Sheet 3M Moisture Barrier Bag Dri-Shield 2000 Product Data Sheet 3M Cushioned Shielding Bag 2120R 3M is a trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3Ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3Ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for one year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronics Materials Solutions Division Static Control Products 926 JR Industrial Drive Sanford, NC 27332-9733 Toll-Free: 866-722-3736 International: 919-718-0000 Please recycle. Printed in USA. Email: 3mstaticinfo mmm.com 3M 2014. All rights reserved. www.3Mstatic.com 78-9102-1989-4 JHA