Page 1 of 2 Scotch 2200, 2210 Vinyl Mastic Pads and Rolls Data Sheet Product Description Mastic Scotch Brand 2200 Pads and 2210 Rolls are self- Composition Highly stable synthetic fusing, rubber based insulating compounds elastomers and resins. laminated to a flexible, all-weather grade vinyl Thickness ASTM-D1000 (PVC) backing. These tape rolls and pre-cut pads Pad 3mm are designed to insulate, moisture-seal and pad all Roll 2.1mm connections up to 600 volts, and have excellent Composite (Backing and Mastic) resistance to abrasion, moisture, alkalies, acid, Thickness ASTM-D1000 copper corrosion and varying weather conditions Pad 3.2mm (including sunlight). Roll 2.3mm Product Features Adhesion to Steel Polyvinyl chloride (PVC) backing. ASTM-D1000 22N/10mm width Compatible Rubber Mastic. Adhesion to Polyethylene Flexible over wide range of temperatures. ASTM-D1000 22N/10mm width Highly resistant to ultraviolet light. Dielectric Strength Easily installed to provide maximum ASTM-D1000 11kV/mm protection. Insulation Resistance Compatible with all common solid dieletric ASTM-D257 >1,000,000 cable insulation. megohms Usable for indoor or outdoor applications. Water Absorption ASTM-D570 .75% Applications (600V maximum) Specifications Bolted connections. Product Service drops. The insulation is a composite of an all-weather Traffic signal wire connections. polyvinyl chloride (PVC) backing and a thick Lighting connections. rubber based, pressure-sensitive adhesive. The Transformer bushing protection. product must be applicable at temperatures ranging Padding bolted connections on bus bar. from -18 C (0 F) to 38 C (100 F) without loss of Grounding rod connection protection. physical or electrical properties. Terminal protection. The product must not degrade when exposed to Cable end sealing. various indoor or outdoor environments. It must Secondary compression connections. also be compatible with all synthetic cable insulations and jointing compounds. When used in Data Average Properties junction boxes, cable trays or gutters, connectors Backing shall be over wrapped with at least one-half lapped Composition All weather polyvinyl chloride layer of glass cloth tape or varnished cambric tape (PVC) plastic. before applying the product. Or, the entire product Colour Black build-up shall be over wrapped with two half- Thickness ASTM-D1000 0.18mm lapped layers of an adhesive-coated cloth tape. Breaking Strength ASTM-D1000 Where use involves direct burial or continuous 35.3N/10mm submersion in water, the product shall be over Elongation ASTM-D1000 200% wrapped with a minimum of two half-lapped layers of plastic electrical tape. 3M UK PLC 3M Ireland 3M UK PLC Electrical Products Sales Office Sales Office 3M Centre, Cain Road 3M House, Adelphi Centre PO Box 393 Bracknell, Berkshire RG12 1JU Dun Laoghaire, Co Dublin, Ireland Bedford MK41 0YE Telephone: 01344 858616 Telephone: 353 1 280 3555 Telephone: 01234 229462 Fax: 01344 858758 Fax: 353 1 280 3509 Fax: 01234 229433 Page 2 of 2 Scotch 2200, 2210 Vinyl Mastic Pads and Rolls Data Sheet Engineering/Architectural Specification All splices for 600-volt wire rated at 80C (176 F) and below shall be insulated with Scotch Brand 2200 Pad or 2210 Roll. The Vinyl Mastic shall be protected from sharp edges and external pressure from heavy objects by at least a one-half lapped layer of Scotch Brand 27 or 69 Glass Cloth Tape, or Scotch 2510 Varnished Cambric Tape before applying Scotch Vinyl Mastic. Or over wrap the entire Vinyl Mastic build-up with two half-lapped layers of an adhesive-coated cloth tape. When directly buried or submerged in water, splices shall be over wrapped with a minimum of two half-lapped layers of Scotch Super 33+ or Super 88 Vinyl Plastic Electrical Tape. Important Notice Technical information provided by 3M is based on experience and/or tests believed to be reliable, but their accuracy is not guaranteed and the results may not be relevant to every users application. For this reason 3M does not accept responsibility or liability, direct or consequential, arising from reliance upon any information provided and the user should determine the suitability of the products for their intended use. Nothing in this statement will be deemed to exclude or restrict 3Ms liability for death or personal injury arising from its negligence. All questions of liability relating to 3M products are governed by the sellers terms of sale subject where applicable to the prevailing law. If any goods supplied or processed by or on behalf of 3M prove on inspection to be defective in material or workmanship, 3M will (at its option) replace the same or refund to the Buyer the price paid for the goods or services. Except as set our above, all warranties and conditions, whether express or implied, statutory or otherwise are excluded to the fullest extent permissible at law. 3M and Scotch are trademarks of the 3M Company. Printed in the UK. 3M United Kingdom PLC, 2003. 3M UK PLC 3M Ireland 3M UK PLC Electrical Products Sales Office Sales Office 3M Centre, Cain Road 3M House, Adelphi Centre PO Box 393 Bracknell, Berkshire RG12 1JU Dun Laoghaire, Co Dublin, Ireland Bedford MK41 0YE Telephone: 01344 858616 Telephone: 353 1 280 3555 Telephone: 01234 229462 Fax: 01344 858758 Fax: 353 1 280 3509 Fax: 01234 229433