Scotch Performance Masking Tape 2364 Technical Data February, 2011 Product Description Scotch Performance Masking Tape 2364 is a tan colored crepe paper masking tape for general masking applications in the industrial market where good holding power and temperature performance is required. Backing Adhesive Color Standard Roll Length Product Construction Smooth crepe paper treated Natural/synthetic Tan 55 m (60.17 yds.)* with a heat resistant saturant rubber blend *Available in metric widths (e.g., 24 mm corresponds to 1 inch). Note: The following technical information and data should be considered representative Typical Physical or typical only and should not be used for specification purposes. Properties ASTM Test Method Adhesion to Steel: 31 oz./in. width (34 N/100 mm) D-3330 Tensile Strength: 24 lbs./in. width (427 N/100 mm) D-3759 Elongation at Break: 10% D-3759 Tape Thickness: 6.5 mils (0.165 mm) D-3652 Temperature Use Range: Up to 300F (149C) for 30 minutes Features Has a strong backing, making it a good choice for general masking applications. Offers excellent holding at both room temperature and at a higher bake oven temperature. Has been laboratory tested on painted steel panels and found to remove cleanly at bake temperatures up to 300F (149C) for 30 minutes. The actual temperature and time performance may be higher or lower for a given application. Clean removal can vary dependent on surface type, processing conditions such as multiple bakes, type of paint involved as well as the temperature of the surface at removal. We recommend testing the product under your conditions to determine if it meets your needs. Should not be subjected to outdoor exposure or prolonged periods of sunlight as tape may become difficult to remove. Scotch Performance Masking Tape 2364 Storage Store under normal conditions of 70F (21C) and 50% R.H. in the original carton. Shelf Life To obtain best performance, use this product within one year from date of manufacture. The technical information, recommendations and other statements contained in this document are Technical Information based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Many factors beyond 3Ms control and uniquely within users knowledge and control can affect the use Product Use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for users method of application. Unless an additional warranty is specifically stated on the applicable 3M product packaging or product Warranty, literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time Limited Remedy, 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR and Disclaimer IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3Ms option, replacement of the 3M product or refund of the purchase price. Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, Limitation of Liability whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. ISO 9001: 2008 This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2008 standards. Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 Recycled Paper St. Paul, MN 55144-1000 Scotch is a registered trademark of 3M. 800-362-3550 877-369-2923 (Fax) 40% pre-consumer Printed in U.S.A. 10% post-consumer 3M 2011 70070948396 (2/11) www.3M.com/industrial