3 Shield Bonding Products Shield Bonding Products Scotchlok 4460 Shield Bond Connector (No Tabbing Required) The 4460 Shield Bond Connector is designed to make a stable, low-resistance electrical connection between the shield of a communications cable and a conductor such as a strap, bar, or wire. The connector consists of four parts: lower member (base), upper member (top), and two securing nuts (lock nuts). The base teeth are set at such an angle as to permit easy insertion under the cable shield. Top and base members are made of tin-plated tempered brass, slightly curved to exert a continuous spring force on sheath and shield after clamping. 307 Scotchlok 4460-S Shield Bond Connector The 4460-S Shield Bond Connector is designed to make a stable, low-resistance electrical connection between the shield of a communications cable and a conductor such as a strap, bar, or wire. The connector consists of ve parts: lower member (base), upper member (top), two securing nuts (lock nuts) and a plastic shoe to aid connector insertion and to protect conductors. The base teeth are set at such an angle as to permit easy insertion under the cable shield. Top and base members are made of tin-plated tempered brass, slightly curved to exert a continuous spring force on sheath and shield after clamping. 308 Scotchlok 4460-D Shield Bond Connector The 4460-D Shield Bond Connector is a downsized version of the 4460 Shield Bond Connector. Its small size makes it an excellent choice for cables of 100-pair or less. Its current-carrying capacity is equal to or better than aluminum-shielded cables of 100-pair or less and can be used on all cable with 20.3 mm (0.8 ) or smaller O.D. 309 Scotchlok 4460-D/FO Shield Bond Connector Assembly The 4460-D/FO Shield Bond Connector is specically designed to meet the bonding needs of ber optic cables that contain metallic or berglass strength members. The connector is a version of the 4460-D Connector Assembly which utilizes two additional plates to capture and secure the strength members. Its current-carrying capacity is equal to or better than aluminum-shielded ber optic cable and can be used on all cables with 20.3 mm (0.8 ) or smaller O.D. 310 Scotchlok 4462 Shield Bond Connector (Designed Specically For C.A.C.S.P. Cable) The 4462 Shield Bond Connector is designed to make a stable, low resistance electrical connection between the shield of a communications cable and a conductor such as a strap, bar, wire or braid. Scotchlok 4462-FN Shield Bond Connector Includes anged nuts. 311 Closures pg. 113 Fiber Protection pg. 236 197Scotchlok 4462-SN Shield Bond Connector The 4462-SN Shield Bond Connector is an improved version of the popular 4462 Shield Bond Connector, with a longer and stronger stud to easily accommodate two bond braids (with eyelets). It is specically designed to supply greater pullout strength than the 4462 Shield Bond Connector. The nuts have been deepened, too, making them much easier to hold and tighten. The 4462-SN Shield Bond Connector is also designed for use with coated cables and has superior electrical properties for the protection of data circuits. Scotchlok 4462-SNA 312 The 4462-SNA has a longer stud, deepened nuts and an insulating shoe. Scotchlok 4463 Service Wire Shield Connector The 4463 Service Wire Shield Connector is designed to make a stable, low resistance electrical connection between the shield of a buried service wire and the ground stud of a house terminal box or other shield connector. The 4463 can be used on service wire with an O.D. up to 11 mm (0.45 ). 313 Scotchlok 4464 Shield Bond Connector The 4464 Shield Bond Connector is a strip of tin-plated brass, punched with mounting holes and two sets of sharp teeth. Each connector can join the shields of up to four two-pair service wires to a stud type shield connector. In addition to providing a stable, low-resistance electrical contact, the connector provides excellent strain relief and occupies a minimum of space. Each connector will accommodate up to four service wires with a shield diameter of up to 5.6 mm (0.21 ) or two service wires with a shield diameter up to 819 mm (0.35 ). 314 Scotch 25T Grounding Braid This at, tin-plated copper braid conductor is supplied for use with Scotchlok shield bond connectors. When clamped rmly, 25T Braid provides low electrical resistance connections for dependable shield bonding, and its physical strength contributes to strain relief across spliced cables, 25T Braid is l3 mm (1/2 ) wide, and is supplied in 7.6 m (25 ) rolls. Size: 13 mm x 7.6 m (1/2 x 25 ) 315 Scotch 25T Grounding Braid with Eyelets Provides low electrical resistance connections, contributes to strain relief across cables. Eyelets t shield connector studs up to 6 mm (1/4 ) diameter. Size: 13 mm x 7.6 m (1/2 x 25 ), eyelets spaced 76 mm (3 ) Size: 13 mm x 7.6 m (1/2 x 25 ), eyelets spaced 152 mm (6 ) 316 25/4467 Grounding Braid Dispenser Pack The 25/4467 Grounding Braid Dispenser Pack is a combination of our dependable grounding braid and insulation sleeve in one convenient package. Equal lengths of each can be dispensed from the 7.6 m (25 ) roll. Size: Braid 13 mm x 7.6 m (1/2 x 25 ) Sleeve 13 mm x 7.6 m (1/2 x 25 ) 25/4467 without eyelets 317 198 Phone 800/426 8688 Fax 800/626 0329 www.3M.com/telecom 3