Scotchlok 314U Self-Stripping Electrical Pigtail Connectors Data Sheet Application Installation Instructions Use Part No. 314U to electrically connect two or three wire ends and insulate the connection. WARNING Turn power off before installing or removing terminal. All electrical Wire Range work should be done according to appropriate electrical codes. 22-14 AWG Solid or stranded, tinned or untinned 2 (0,5-1.5 mm ) copper conductors. For use with 1. Insert 2 or 3 unstripped wires completely into common thermoplastic insulated wires: T, TF, TFF, connector and check their position by looking TFN, TFFN, AWM, TEW, SAE-GPT with a maximum through the translucent connector body. insulation diameter of .150 inches (3,8 mm). Maximum 2. Hold tool perpendicular to the wires and make the recommended current for general purpose applications: connection by driving the cap down flush with the 22 AWG - 3 AMPS, 20 AWG - 5 AMPS, 18 AWG - top edge of the connector body. 7 AMPS, 16 AWG - 10 AMPS, 14 AWG - 15 AMPS. Regulatory Agencies Construction UL Listed - Tested per UL Standard 486C U-contact - Tin plated brass, .02 in. (0,5 mm) thick UL file No. E23438 Insulator - Flame retardant nylon, CSA certified - CSA Std. C22.2 No. 0. 188-MI983 Color - cap/white, body/white CSA File No. LR15503 (Voltage rated at 600 volts maximum, building wire: Weight 1000 volts maximum, signs, fixtures and luminaires0069 lb. (3.14 gm) Operating Temperature: 105C.) Recommended Installation Tools Note: UL Listed and CSA Certified for AWG only. 3M Crimping Tool No. E-9BM Mechanics (slip joint) PliersEngineering Specification Self-Stripping Electrical Connector (as manufactured by 3M, part No. 314U) capable of connecting 2 or 3 wires in the range of No. 22 thru No. 14 AWG solid or stranded copper wire in a pigtail application while insulating the connection. Connector shall be UL Listed and CSA Certified for 600 volts maximum, building wire: 1000 volts maximum, signs, fixtures and luminaires, and temperature rated 105C maximum. 3M and Scotchlok are trademarks of 3M Company. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA www.3M.com/elpd 3M 2003 78-8126-5516-1-A