3357-6215-1C 3M

3M D Sub EMI Junction Shell Metalized Plastic Protection from EMI/ESD Easy assembly reduces time and labor for low cost Light weight and a compact design Strain Relief compensates for multiple cable diameters Jack screws provide positive retention RoHS* compliant TS-2132-02 Date Modified: January 15, 2007 Sheet 1 of 3 Physical Shell and Hardware Shell Material: ABS Shell Plating: Nickel Over Copper Hardware: (2) Jackscrews 4-40 .438 (2) Saddle Washers 4 (2) Nuts 4-40 (2) Screws 4-40 .450 Material: Steel Plating: Bright Zinc Compression Insert: Material: Thermo Plastic Elastomer Flammability: UL 94HB Durometer: 75 + / -5 Mounting Hardware: See Specification Sheet TS-0142 Environmental Temperature Rating: 0C to +75CRoHS complian means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M s knowledge and belief based upon information provided by third party suppliers to 3M. 3 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call 3M D Sub EMI Junction Shell Metalized Plastic Inch m m Tolerance Unless Noted .0 .00 .000 inch .1 .01 .005 Dim ensions for R eference Only O DIM. DIM. DIM. DIM. DIM. DIM. DIM. Table 1 - Junction Shell Dimensions Cable O.D. Range 3M Part Number Dim. Dim. Dim. Dim. Dim. Dim. Min Max* 3357-6209-1C 1.217 30.91 1.692 42.98 .400 10.16 N/A .984 24.99 0.19 4.8 0.35 8.9 3357-6215-1C 1.540 39.12 1.650 41.91 .400 10.06 N/A 1.312 33.32 0.19 4.8 0.35 8.9 .640 16.26 0.19 4.8 0.46 11.7 3357-6225-1C 2.090 53.08 1.800 45.72 .522 13.26 .710 18.03 1.857 47.17 3357-6237-1C 2.734 69.44 1.975 50.17 .726 18.44 .906 23.01 2.500 63.50 0.30 7.6 0.68 17.27 3357-6250-1C .770 19.56 2.645 67.18 2.000 50.80 .726 18.44 .940 23.88 2.406 61.11 0.30 7.6 0.84 21.34 Note: *These numbers will vary depending upon the compressibility of the wire. Backshell Dimension Table Table 1 TS-2132-02 Sheet 2 of 3 3 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call