3357-6515 3M

3M D Sub EMI Junction Shell Metalized Plastic Protection from EMI/ESD Easy assembly helps reduce time and labor to ensure low applied cost Light weight, compact design Strain relief compensates for multiple cable diameters Jackscrews provide positive retention For regulatory information about this product, visit 3M.com/regs or contact your 3M representative Date Modified: Fe bruary 14, 2019 TS-0032-C Sheet 1 of 2 Physical Shell: Material: ABS Plating: Nickel over Copper Compression Insert: Material: Thermoplastic Elastometer Flammability: UL 94V-0 Durometer: 75 5 Hardware: (2) Jackscrews 4-40 .438 (2) Saddle Washers (2) Nuts 4-40 UNC for 9, 15 & 25 position (3) Nuts 4-40 UNC for 37 position (2) Screws 4-40 UNC for 9, 15 & 25 position (3) Screws 4-40 UNC for the 37 position Material: Steel Plating: Zinc Mounting Hardware: See Specification Sheet TS-0142 Environmental 0C to +75C Temperature Rating: 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronics Materials Solutions Division 800-225-5373 Interconnect Solutions 3M D Sub EMI Junction Shell Metalized Plastic Table 1 - Compression Insert Dimensions 1 2 3 4 5 6 Insert for G OD ID OD ID OD ID OD ID OD ID OD ID 3357-6509 0.475 0.320 0.360 0.315 0.360 0.285 0.360 0.255 0.360 0.210 0.475 N/A N/A 12.07 8.13 9.14 8.00 9.14 7.24 9.14 6.48 9.14 5.33 12.07 3357-6515 0.600 0.450 0.450 0.410 0.450 0.370 0.450 0.300 0.450 0.230 0.600 3357-6525 N/A N/A 15.24 11.43 11.43 10.41 11.43 9.40 11.43 7.62 11.43 5.84 15.24 0.810 0.650 0.700 0.620 0.655 0.570 0.655 0.500 0.655 0.425 0.655 0.350 0.810 3357-6537 20.57 16.51 17.78 15.75 16.64 14.48 16.64 12.70 16.64 10.80 16.64 8.89 20.57 D COVER SCREW TOP COVER G (Dia Collar) F 1 2 See note 3 CABLE SHIELD E (FOLDED BACK) CABLE 3 CONNECTOR CAPTIVE SCREW 4 C 5 SADDLE WASHER 6 NUT BOTTOM COVER A B Compression Inserts Junction Shell see Table 1 see Table 2 Table 2 - Junction Shell Dimensions Cable O.D. Range 3M Part Number A B C D E F Min Max Inch 1.22 1.58 0.984 mm 3357-6509 31.0 40.13 24.99 0.40 0.64 0.210 0.320 Tolerance Unless Noted 10.2 16.3 5.33 8.13 1.54 1.88 1.312 3357-6515 39.1 47.75 33.32 .0 .00 .000 0.64 16.3 2.09 1.71 0.52 0.71 1.857 0.23 0.45 Inch .1 .01 .005 3357-6525 53.1 47.75 13.2 18.0 47.17 5.84 11.43 Dimensions for Reference Only 2.73 2.12 0.73 0.91 2.500 0.35 0.65 3357-6537 69.3 53.85 18.5 23.11 63.50 8.89 16.51 Note: 1. Compression inserts cannot be ordered separately. 2. Use applicable Jack Screw or Jack Socket Kit mounting hardware. 3. The 37 position shell has 3 cover screw holes. Ordering Information 3357 - 65XX - 1C Connector Size 09 = 9 Position 15 = 15 Position 25 = 25 Position TS-0032-C 37 = 37 Position Sheet 2 of 2 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronics Materials Solutions Division 800-225-5373 Interconnect Solutions