8 7 6 5 4 3 2 1
NOTES
TM
1.
REGULATORY INFORMATION:
* MILITARY (WITH 3M'S N3518 POLARIZING KEY)
3M FOUR-WALL HEADER, 3000 SERIES
ROHS COMPLIANT. SEE THE
AND CENTERBUMP POLARIZATION.
REGULATORY INFORMATION
.100" X .100" LATCH/EJECTOR, STRAIGHT AND RIGHT ANGLE
* OPTIONAL EJECTOR LATCHES.
APPENDIX (RIA) IN THE
* MOUNTING HOLES FOR SECURING HEADER TO BOARD.
ROHS COMPLIANC SECTION
* OPTIONAL POLARIZING POSTS AVAILABLE.
OF WWW.3MCONNECTORS.COM FOR
* HIGH TERMERATURE INSULATOR SUITABLE FORNO LEA
COMPLIANCE INFORMATION.
DIM.
SOLDERING OPERATIONS.
* SUITABLE FOR REFLOW SOLDERING USINGPASTE IN HOL
2 IN THE EVENT OF CONFLICT
TECHNIQUES.
BETWEEN THIS DATA AND THAT
* SOLDER TAIL OPTION.
CONTAINED IN THE PRODUCT
D .68 D
SPECIFICATION, THE PRODUCT
SPECIFICATION TAKES PRECEDENT.
17.4
3 NOTCHES A & C WILL ACCOMODATE
3M POLARIZING KEY: N3518.
4 MOUNTING HARDWARE:
2
FROM SOLDER SIDE OF PC BOARD
PHYSICAL:
-X0XX USE #4-24 THREAD CUTTING SCREW
INSULATOR:
(3M PART #3341-5) WITH
HEADER WITHOUT LATCH EJECTOR
MATERIAL: GLASS FILLED POLYESTER (PCT)
.116 [2.95] MOUNTING HOLE.
FLAMMABILITY: UL94V-0
FOR RIGHT ANGLE VERSION ONLY:
COLOR: BLACK
#2-56 BOLT AND NUT (3M PART
CONTACT:
#3341-6) WITH .106 [2.69]
MATERIAL: COPPER ALLOY
.010
.424
MOUNTING HOLE MAY BE USED.
PLATING:
10.77 0.25
UNDER PLATING: 100 [2.54 m] AVG. NICKEL-OVERALL
5 THE RECOMMENDED PCB HOLE SIZE
WIPING AREA: 30 [0.76 m] AVG. GOLD FOR THE KINKED TAIL POSITIONS
SOLDER TAILS: TIN LEAD OR MATTE TIN (SEE ORDERING INFORMATION) ON THE .112 SOLDER TAIL
MARKINGS: 3M LOGO, PART IDENTIFICATION NUMBER AND ORIENTATION TRIANGLE CONNECTOR IS .035 .002.
(SEE K2 VERSION).
.97
.08
2.0 2
ELECTRICAL:
24.7
EIA CURRENT RATING: 5.00A, 1 CONTACT POWERED
3.00A, 6 CONTACTS POWERED
C C
1.75A, ALL CONTACTS POWERED
RATING CONDITIONS: EIA-364-070 METHOD 2, 30 C MAXIMUM
.37 9.5
TEMPERATURE RISE, 20% DERATED. REFERENCE APPROPRIATE
-X2XX
3M PRODUCT SPECIFICATION FOR DETAILED CURRENT DERATING
HEADER WITH SHORT LATCH EJECTOR
CURVES.
9
FOR 3M SOCKETS WITHOUT STRAIN RELIEF
INSULATION RESISTANCE: >1 X 10 AT 500 V
DC
WITHSTANDING VOLTAGE: 1,000V AT SEA LEVEL
RMS
UL CURRENT RATING: 1.0A ALL LINES POWERED
UL VOLTAGE RATING: 125V
.573 .010
0.25
14.55 2
ENVIRONMENTAL:
UL TEMPERATURE RATING: 130C
EIA TEMPERATURE RATING: -55 C TO 105 C
PROCESS RATING: 260 C, PER J-STD-020C, SINGLE PASS
MOISTURE SENSITIVITY LEVEL: 1 (PER J-STD-020C)
1.07
.08
2.0
27.2
B B
.46 11.7
-X3XX
HEADER WITH LONG LATCH EJECTOR
FOR 3M SOCKETS WITH STRAIN RELIEF
ORDERING INFORMATION
X3XXX-XXXXXX
T 62689 JUL 10,2015 JNC SN
N= HIGH TEMP BLACK (PCT)/(RB PLATING REQ'D)
PLATING:
ADD 5X05 OPTION AND
BLANK= STANDARD TEMP (UB AND EB PLATING)
REVISE NOTES
RB = 200 [5.08 m] MATTE TIN TAILS
(APP. E1 & C1 APPLY) S 60056 MAR 06,2015 JNC RS
3M PART NUMBER:
UB OR BLANK, STANDARD TEMP ONLY = 200 [5.08 m]
REVISE ORDERING
(SEE TABLE 1)
NUMBER
TIN LEAD TAILS (APP. E3 & C2 APPLY)
DIMENSIONS: INCHES [MM]
EB OR BLANK, WWT TAIL OPTION 05 ONLY =
R 56068 JUL 25,2014 JNC RS
[MM] IS REF. ONLY
PIN CONFIGURATION:
FLASH GOLD TAIL (APP.E1 & C1 APPLY)
REVISED AND REDRAWN
5 = RIGHT ANGLE SOLDER TAILS
DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD
TAIL:
6 = STRAIGHT SOLDER TAILS
ACCESS DRFT DATE MFG DATE
CODES CASTIGLIONE JUL 25,2014
02 = FOR .062 [1.57] THICK BOARD
CHKD DATE APPVL DATE
03 = FOR .094 TO .125 [2.39 TO 3.18] THICK BOARD
R. SCHERER SEP 05,2014
A A
DIVISION DIVISION CODE
05 = WWT FOR UP TO 3 LEVELS OF WIRE WRAP C
3M COPYRIGHT 2016
3M Center
Interconnect Solutions EMSD
This document and the information it contains are
K2 = KINKED FOR .062 [1.57] THICK BOARD
3M property and may not be reproduced or further
St. Paul,
SCALE TOLERANCES
DO NOT distributed without 3M permission, or used or
EXCEPT AS MN 55144
disclosed other than for 3M authorized purposes.
2
SCALE
All rights reserved.
NOTED
1
DRAWING
TITLE
LATCH/EJECTOR SYSTEM:
INCHES
3M ELECTRONIC MATERIALS SOLUTIONS DIVISION
.0
0 = NO LATCH/EJECTOR INSTALLED
HEADER, 4-WALL, .100
.00 .01
INTERCONNECT SOLUTIONS
2 = SHORT ROLL PIN LATCH/EJECTORS
.000 .005
8 7 6 5 4 3 2 1
TM
3M FOUR-WALL HEADER, 3000 SERIES
DIM. .28
.100" X .100" LATCH/EJECTOR, STRAIGHT AND RIGHT ANGLE
7.1
.100
.020
2.54 0.51
.100
2.54
D D
.34
.25
.025 .002
.002
.025
8.6
6.4
0.05
0.64
0.64 0.05
SQ. TYP.
SQ. TYP.
2X .100
POSITION #1
2.54
SEE NOTE 4
DIM.
DIM.
.24
TYP.
.24
6.2
6.2
NOTCH
.100
(SEE TABLE 1 & NOTE 3)
.30
.30
POSITION 1
7.5
2.54
.16
ORIENTATION NOTCH
7.5
TRIANGLE (SEE TABLE 1)
4.1
NOTCH
.010
DIM.
A B
DIM. .010
.049
(SEE TABLE 1 & NOTE 3)
TAIL
TAIL
DIM.
C C
1.24
TYP.
SECTION B-B
SECTION A-A
(RIGHT ANGLE VERSION)
(STRAIGHT VERSION)
.68
.19
17.4
4.8
TABLE 1
PIN 3M PART POLARIZING PIN
DIM. DIM. DIM. DIM.
.12 3.0
QTY. NUMBER NOTCHES QTY.
2X .100
06 3869 1.06 [27.0] .905 [22.99] .665 [16.89] .51 [12.9] B* 06 A
B
2.54 .020 0.51
08 3889 1.16 [29.5] 1.005 [25.53] .765 [19.43] .61 [15.5] B* 08
10 3793 1.26 [32.1] 1.105 [28.04] .865 [21.97] .71 [18.0] BC 10
SEE NOTE 4
DIM. .20
14 3314 1.46 [37.2] 1.305 [33.12] 1.065 [27.05] .91 [23.1] BC 14
16 3408 1.56 [39.7] 1.405 [35.66] 1.165 [29.59] 1.01 [25.6] ABC 16 5.1
DIM.
20 3428 1.76 [44.8] 1.604 [40.74] 1.365 [34.67] 1.21 [30.7] ABC 20
24 3627 1.96 [49.9] 1.805 [45.82] 1.565 [39.75] 1.41 [35.8] ABC 24
B B
26 3429 2.06 [52.4] 1.905 [48.36] 1.665 [42.29] 1.51 [38.3] ABC 26
30 3440 2.26 [57.5] 2.105 [53.44] 1.865 [47.37] 1.71 [43.4] ABC 30
34 3431 2.46 [62.6] 2.305 [58.52] 2.065 [52.45] 1.91 [48.5] ABC 34
40 3432 2.76 [70.2] 2.605 [66.14] 2.365 [60.07] 2.21 [56.1] ABC 40
50 3433 3.26 [82.9] 3.105 [78.84] 2.865 [72.77] 2.71 [68.8] ABC 50
60 3372 3.76 [95.6] 3.605 [91.54] 3.365 [85.47] 3.21 [81.5] ABC 60
64 3764 3.96 [100.7] 3.805 [96.62] 3.565 [90.55] 3.41 [86.6] ABC 64
* AVAILABLE WITHOUT CENTER NOTCH B. CONTACT 3M
T 62689 JUL 10,2015 JNC SN
TABLE 2
ADD 5X05 OPTION AND
REVISE NOTES
3M PART PIN CROSS SECTION
S 60056 MAR 06,2015 JNC RS
NUMBER CONTACT TAIL DIM. DIM.
DIM. DIAGONALS CORNER RADII
REVISE ORDERING
SUFFIX
NUMBER
-5XX2
R 56068 JUL 25,2014 JNC RS
.062 [1.57] THICK .035+/-.003 [.89]
.112 [2.84] .0245+/-.0005 [.622] .028+/-.001 [.71] .0075 [.191] REF.
PC BOARD SEE NOTE 5
REVISED AND REDRAWN
-6XX2
DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD
ACCESS DRFT DATE MFG DATE
.094 [2.39] TO
CODES CASTIGLIONE JUL 25,2014
-5X03
CHKD DATE APPVL DATE
.125 [3.18] THICK .155 [3.94] .0245+/-.0005 [.622] .028+/-.001 [.71] .0075 [.191] REF. .035+/-.003 [.89]
R. SCHERER SEP 05,2014
A A
-6X03 PC BOARD
DIVISION DIVISION CODE
C
3M COPYRIGHT 2016
3M Center
Interconnect Solutions EMSD
This document and the information it contains are
WIRE WRAP TAIL 3M property and may not be reproduced or further
St. Paul,
SCALE TOLERANCES
DO NOT distributed without 3M permission, or used or
EXCEPT AS MN 55144
disclosed other than for 3M authorized purposes.
FOR UP TO 3 .61 [15.5] 4
SCALE
All rights reserved.
NOTED
-5X05 .0250+/-.002 [.635] .035+/-.003 [.89] .003 [.08] MAX. .045+/-.003 [1.14]
1
DRAWING
LEVELS OF WIRE REF.
TITLE
INCHES
WRAP
.0
HEADER, 4-WALL, .100
.00 .01
.000 .005
X .100 LATCH/EJECTOR,
THIRD ANGLE PROJECTION .0000
MILLIMETERS
INTERPRET PER
STRAIGHT & RA
ASME Y14.5 - 2009 0
.0 .3
CAGE SIZE DRAWING NO. REV.
MAX SURFACE ROUGHNESS
.00 .13
NUMBER
ALL SURFACES .000 78-5100-0772-3 T
MODEL DET.
MARKED ONLY
ANGLES
3000 SERIES YES NO SHT 2 OF 4
LISTS
8 7 6 5 4 3 2 1
78-5100-0772-3 T
DRAWING NUMBER REVISION
Imaged: T.2 7/12/2016 8:14 AM UTC-05:00