8 7 6 5 4 3 2 1 NOTES TM 1. REGULATORY INFORMATION: * MILITARY (WITH 3M S N3518 POLARIZING KEY) 3M FOUR-WALL HEADER, 3000 SERIES ROHS COMPLIANT. SEE THE AND CENTERBUMP POLARIZATION. REGULATORY INFORMATION .100 X .100 LATCH/EJECTOR, STRAIGHT AND RIGHT ANGLE * OPTIONAL EJECTOR LATCHES. APPENDIX (RIA) IN THE * MOUNTING HOLES FOR SECURING HEADER TO BOARD. ROHS COMPLIANC SECTION * OPTIONAL POLARIZING POSTS AVAILABLE. OF WWW.3MCONNECTORS.COM FOR * HIGH TERMERATURE INSULATOR SUITABLE FORNO LEA COMPLIANCE INFORMATION. DIM. SOLDERING OPERATIONS. * SUITABLE FOR REFLOW SOLDERING USINGPASTE IN HOL 2 IN THE EVENT OF CONFLICT TECHNIQUES. BETWEEN THIS DATA AND THAT * SOLDER TAIL OPTION. CONTAINED IN THE PRODUCT D .68 D SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. 17.4 3 NOTCHES A & C WILL ACCOMODATE 3M POLARIZING KEY: N3518. 4 MOUNTING HARDWARE: 2 FROM SOLDER SIDE OF PC BOARD PHYSICAL: -X0XX USE 4-24 THREAD CUTTING SCREW INSULATOR: (3M PART 3341-5) WITH HEADER WITHOUT LATCH EJECTOR MATERIAL: GLASS FILLED POLYESTER (PCT) .116 2.95 MOUNTING HOLE. FLAMMABILITY: UL94V-0 FOR RIGHT ANGLE VERSION ONLY: COLOR: BLACK 2-56 BOLT AND NUT (3M PART CONTACT: 3341-6) WITH .106 2.69 MATERIAL: COPPER ALLOY .010 .424 MOUNTING HOLE MAY BE USED. PLATING: 10.77 0.25 UNDER PLATING: 100 2.54 m AVG. NICKEL-OVERALL 5 THE RECOMMENDED PCB HOLE SIZE WIPING AREA: 30 0.76 m AVG. GOLD FOR THE KINKED TAIL POSITIONS SOLDER TAILS: TIN LEAD OR MATTE TIN (SEE ORDERING INFORMATION) ON THE .112 SOLDER TAIL MARKINGS: 3M LOGO, PART IDENTIFICATION NUMBER AND ORIENTATION TRIANGLE CONNECTOR IS .035 .002. (SEE K2 VERSION)97 .08 2.0 2 ELECTRICAL: 24.7 EIA CURRENT RATING: 5.00A, 1 CONTACT POWERED 3.00A, 6 CONTACTS POWERED C C 1.75A, ALL CONTACTS POWERED RATING CONDITIONS: EIA-364-070 METHOD 2, 30 C MAXIMUM .37 9.5 TEMPERATURE RISE, 20% DERATED. REFERENCE APPROPRIATE -X2XX 3M PRODUCT SPECIFICATION FOR DETAILED CURRENT DERATING HEADER WITH SHORT LATCH EJECTOR CURVES. 9 FOR 3M SOCKETS WITHOUT STRAIN RELIEF INSULATION RESISTANCE: >1 X 10 AT 500 V DC WITHSTANDING VOLTAGE: 1,000V AT SEA LEVEL RMS UL CURRENT RATING: 1.0A ALL LINES POWERED UL VOLTAGE RATING: 125V .573 .010 0.25 14.55 2 ENVIRONMENTAL: UL TEMPERATURE RATING: 130C EIA TEMPERATURE RATING: -55 C TO 105 C PROCESS RATING: 260 C, PER J-STD-020C, SINGLE PASS MOISTURE SENSITIVITY LEVEL: 1 (PER J-STD-020C) 1.07 .08 2.0 27.2 B B .46 11.7 -X3XX HEADER WITH LONG LATCH EJECTOR FOR 3M SOCKETS WITH STRAIN RELIEF ORDERING INFORMATION X3XXX-XXXXXX T 62689 JUL 10,2015 JNC SN N= HIGH TEMP BLACK (PCT)/(RB PLATING REQ D) PLATING: ADD 5X05 OPTION AND BLANK= STANDARD TEMP (UB AND EB PLATING) REVISE NOTES RB = 200 5.08 m MATTE TIN TAILS (APP. E1 & C1 APPLY) S 60056 MAR 06,2015 JNC RS 3M PART NUMBER: UB OR BLANK, STANDARD TEMP ONLY = 200 5.08 m REVISE ORDERING (SEE TABLE 1) NUMBER TIN LEAD TAILS (APP. E3 & C2 APPLY) DIMENSIONS: INCHES MM EB OR BLANK, WWT TAIL OPTION 05 ONLY = R 56068 JUL 25,2014 JNC RS MM IS REF. ONLY PIN CONFIGURATION: FLASH GOLD TAIL (APP.E1 & C1 APPLY) REVISED AND REDRAWN 5 = RIGHT ANGLE SOLDER TAILS DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD TAIL: 6 = STRAIGHT SOLDER TAILS ACCESS DRFT DATE MFG DATE CODES CASTIGLIONE JUL 25,2014 02 = FOR .062 1.57 THICK BOARD CHKD DATE APPVL DATE 03 = FOR .094 TO .125 2.39 TO 3.18 THICK BOARD R. SCHERER SEP 05,2014 A A DIVISION DIVISION CODE 05 = WWT FOR UP TO 3 LEVELS OF WIRE WRAP C 3M COPYRIGHT 2016 3M Center Interconnect Solutions EMSD This document and the information it contains are K2 = KINKED FOR .062 1.57 THICK BOARD 3M property and may not be reproduced or further St. Paul, SCALE TOLERANCES DO NOT distributed without 3M permission, or used or EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 2 SCALE All rights reserved. NOTED 1 DRAWING TITLE LATCH/EJECTOR SYSTEM: INCHES 3M ELECTRONIC MATERIALS SOLUTIONS DIVISION .0 0 = NO LATCH/EJECTOR INSTALLED HEADER, 4-WALL, .100 .00 .01 INTERCONNECT SOLUTIONS 2 = SHORT ROLL PIN LATCH/EJECTORS .000 .005 8 7 6 5 4 3 2 1 TM 3M FOUR-WALL HEADER, 3000 SERIES DIM28 .100 X .100 LATCH/EJECTOR, STRAIGHT AND RIGHT ANGLE 7.1 .100 .020 2.54 0.51 .100 2.54 D D .34 .25 .025 .002 .002 .025 8.6 6.4 0.05 0.64 0.64 0.05 SQ. TYP. SQ. TYP. 2X .100 POSITION 1 2.54 SEE NOTE 4 DIM. DIM24 TYP24 6.2 6.2 NOTCH .100 (SEE TABLE 1 & NOTE 3) .30 .30 POSITION 1 7.5 2.54 .16 ORIENTATION NOTCH 7.5 TRIANGLE (SEE TABLE 1) 4.1 NOTCH .010 DIM. A B DIM010 .049 (SEE TABLE 1 & NOTE 3) TAIL TAIL DIM. C C 1.24 TYP. SECTION B-B SECTION A-A (RIGHT ANGLE VERSION) (STRAIGHT VERSION) .68 .19 17.4 4.8 TABLE 1 PIN 3M PART POLARIZING PIN DIM. DIM. DIM. DIM12 3.0 QTY. NUMBER NOTCHES QTY. 2X .100 06 3869 1.06 27.0 .905 22.99 .665 16.89 .51 12.9 B* 06 A B 2.54 .020 0.51 08 3889 1.16 29.5 1.005 25.53 .765 19.43 .61 15.5 B* 08 10 3793 1.26 32.1 1.105 28.04 .865 21.97 .71 18.0 BC 10 SEE NOTE 4 DIM20 14 3314 1.46 37.2 1.305 33.12 1.065 27.05 .91 23.1 BC 14 16 3408 1.56 39.7 1.405 35.66 1.165 29.59 1.01 25.6 ABC 16 5.1 DIM. 20 3428 1.76 44.8 1.604 40.74 1.365 34.67 1.21 30.7 ABC 20 24 3627 1.96 49.9 1.805 45.82 1.565 39.75 1.41 35.8 ABC 24 B B 26 3429 2.06 52.4 1.905 48.36 1.665 42.29 1.51 38.3 ABC 26 30 3440 2.26 57.5 2.105 53.44 1.865 47.37 1.71 43.4 ABC 30 34 3431 2.46 62.6 2.305 58.52 2.065 52.45 1.91 48.5 ABC 34 40 3432 2.76 70.2 2.605 66.14 2.365 60.07 2.21 56.1 ABC 40 50 3433 3.26 82.9 3.105 78.84 2.865 72.77 2.71 68.8 ABC 50 60 3372 3.76 95.6 3.605 91.54 3.365 85.47 3.21 81.5 ABC 60 64 3764 3.96 100.7 3.805 96.62 3.565 90.55 3.41 86.6 ABC 64 * AVAILABLE WITHOUT CENTER NOTCH B. CONTACT 3M T 62689 JUL 10,2015 JNC SN TABLE 2 ADD 5X05 OPTION AND REVISE NOTES 3M PART PIN CROSS SECTION S 60056 MAR 06,2015 JNC RS NUMBER CONTACT TAIL DIM. DIM. DIM. DIAGONALS CORNER RADII REVISE ORDERING SUFFIX NUMBER -5XX2 R 56068 JUL 25,2014 JNC RS .062 1.57 THICK .035+/-.003 .89 .112 2.84 .0245+/-.0005 .622 .028+/-.001 .71 .0075 .191 REF. PC BOARD SEE NOTE 5 REVISED AND REDRAWN -6XX2 DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD ACCESS DRFT DATE MFG DATE .094 2.39 TO CODES CASTIGLIONE JUL 25,2014 -5X03 CHKD DATE APPVL DATE .125 3.18 THICK .155 3.94 .0245+/-.0005 .622 .028+/-.001 .71 .0075 .191 REF035+/-.003 .89 R. SCHERER SEP 05,2014 A A -6X03 PC BOARD DIVISION DIVISION CODE C 3M COPYRIGHT 2016 3M Center Interconnect Solutions EMSD This document and the information it contains are WIRE WRAP TAIL 3M property and may not be reproduced or further St. Paul, SCALE TOLERANCES DO NOT distributed without 3M permission, or used or EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. FOR UP TO 3 .61 15.5 4 SCALE All rights reserved. NOTED -5X05 .0250+/-.002 .635 .035+/-.003 .89 .003 .08 MAX045+/-.003 1.14 1 DRAWING LEVELS OF WIRE REF. TITLE INCHES WRAP .0 HEADER, 4-WALL, .100 .00 .01 .000 .005 X .100 LATCH/EJECTOR, THIRD ANGLE PROJECTION .0000 MILLIMETERS INTERPRET PER STRAIGHT & RA ASME Y14.5 - 2009 0 .0 .3 CAGE SIZE DRAWING NO. REV. MAX SURFACE ROUGHNESS .00 .13 NUMBER ALL SURFACES .000 78-5100-0772-3 T MODEL DET. MARKED ONLY ANGLES 3000 SERIES YES NO SHT 2 OF 4 LISTS 8 7 6 5 4 3 2 1 78-5100-0772-3 T DRAWING NUMBER REVISION Imaged: T.2 7/12/2016 8:14 AM UTC-05:00