8 7 6 5 4 3 2 1 NOTES MATERIAL: 1 TM 3M Ribbon Cable Socket 2 mm X 2 mm Pitch 158 Series BODY: HIGH TEMP GLASS FILLED POLYESTER, 5.22 GRAY UL94V-0 CONTACTS: COPPER ALLOY .206 DIM B 2 PLATING: 2.03-3.81 m 80-150 in NICKEL UNDERPLATE D D 0.38 m 15 in OR 0.76 m 30 in AVG 8.48 MAXIMUM MATING GOLD ON WIPING AREA. PIN LENGTH .334 3 RIBBON CABLE: 4.19 5.84 TM RECOMMENDED: 3M 3625 .165 (28 AWG, 7 STRAND)230 APPLICATION TOOLS: 4 1.75 3460 PRESS (OR EQUIVALENT) 1.90 4.97 3443-119 LOCATOR PLATE, .069 .075 .196 3442-9 PLATEN 4.00 MATE SEE 3M INSTRUCTION SHEET DIM G PIN 1 INDICATOR POINT 78-9101-2810-3158 DIM A OPTIONAL TM MATES WITH 3M HEADERS 5 CENTER BUMP 159 SERIES (REFERENCE 3M DRAWING 78-5100-2359-7). 1.63 .064 TYP 2.00 .0787 TYP OPTIONAL (0.51 mm .020 in SQ, FRICTION BUMP CROWNED PINS). SEE THE REGULATORY 6 C INFORMATION APPENDIX (RIA) C IN THERoHS COMPLIANC SECTION OF 2.00 WWW.3MCONNECTOR.COM FOR 11.48 COMPLIANCE INFORMATION .0787 1.53 (RIA E1 & C1 APPLY)452 .060 7 DIM D FOR PRODUCT SPECIFICATIONS AND WARRANTY INFORMATION SEE 3M 78-5102-0078-1. IN THE EVENT OF CONFLICT 8 5.22 BETWEEN THIS DATA AND PREASSEMBLED HEIGHT WITH COVER .206 THAT CONTAINED IN THE PRODUCT SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. DIM E 8.99 B B 5.74 .354 3.25 .226 .128 COVER OPTIONAL NONCONDUCTIVE DIM C TRANSFER ADHESIVE WITH LINER PERFORMANCE 7 8 ASSEMBLED HEIGHT WITH COVER 1.25 A, ALL LINES ENERGIZED CURRENT: 2.00 A, 6 LINES ENERGIZED 2.75 A, 1 LINE ENERGIZED 9 INSULATION RESISTANCE: >1X10 OHMS AT 500 VDC 5.22 G 73037 OCT 27,2017 SBC SAN UPDATED PERFORMANCE WITHSTANDING VOLTAGE: 500 VACrms AT SEA LEVEL .206 TABLE REMOVED REV D,E,F TEMPERATURE RATING: -55 C TO +125 C HISTORY A 30741 OCT 28,2010 LDS SF INITIAL RELEASE 12.04 3.56 DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD ACCESS DRFT DATE MFG DATE .474 CODES L. SCHMIDT JUL 23,2010 DIM F .140 CHKD DATE APPVL DATE S. FELDMAN JUL 30,2010 A A DIVISION DIVISION CODE C 3M COPYRIGHT 2017 3M Center This document and the information it contains are 3M property and may not be reproduced or further St. Paul, SCALE TOLERANCES DO NOT distributed without 3M permission, or used or EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 6 SCALE 6.03 All rights reserved. NOTED 1 DRAWING TITLE INCHES .238 .0 METRIC ENGLISH 3M RIBBON CABLE .00 .000 R SOCKET 2 MM x 2 MM THIRD ANGLE PROJECTION .0000 ASSEMBLED HEIGHT WITH COVER MILLIMETERS INTERPRET PER AND STRAIN RELIEF PITCH 158 SERIES STRAIN RELIEF ASME Y14.5 - 2009 0 2 .0 .5 CAGE SIZE DRAWING NO. REV. MAX SURFACE ROUGHNESS .00 .13 NUMBER UL FILE NO: E68080 ALL SURFACES .000 .005 78-5100-2358-9 G 125 MODEL DET. MARKED ONLY ANGLES 1 YES NO SHT 1 OF 3 LISTS 8 7 6 5 4 3 2 1 78-5100-2358-9 G DRAWING NUMBER REVISION Imaged: G.1 Central Standard Time10/27/2017UTC Offset 8 7 6 5 4 3 2 1 TM 3M Ribbon Cable Socket 2 mm X 2 mm Pitch 158 Series NUMBER OF DIM A DIM B DIM C DIM D DIM E DIM F DIM G POSITIONS 6 6.39 .252 12.64 .497 8.98 .354 10.81 .426 11.32 .446 12.64 .497 N/A 8 8.39 .330 14.64 .576 10.98 .432 12.81 .504 13.32 .524 14.64 .576 N/A 10 10.39 .409 16.64 .655 12.98 .511 14.81 .583 15.32 .603 16.64 .655 N/A D D 12 12.39 .488 18.64 .734 14-98 .590 16.81 .662 17.32 .682 18.64 .734 N/A 14 14.39 .567 20.64 .812 16.98 .669 18.81 .741 19.32 .761 20.64 .812 8.00 .315 16 16.39 .645 22.64 .891 18.98 .747 20.81 .819 21.32 .839 22.64 .891 10.00 .394 20 20.39 .803 26.64 1.049 22.98 .905 24.81 .977 25.32 .997 26.64 1.049 14.00 .551 22 22.39 .882 28.64 1.127 24.98 .984 26.81 1.056 27.32 1.076 28.64 1.127 16.00 .630 24 24.39 .960 30.64 1.206 26.98 1.062 28.81 1.134 29.32 1.154 30.64 1.206 18.00 .709 26 26.39 1.039 32.64 1.285 28.98 1.141 30.81 1.213 31.32 1.233 32.64 1.285 20.00 .787 30 30.39 1.197 36.64 1.442 32.98 1.299 34.81 1.371 35.32 1.391 36.64 1.442 24.00 .945 34 34.39 1.354 40.64 1.600 36.98 1.456 38.81 1.528 39.32 1.548 40.64 1.600 28.00 1.102 40 40.39 1.590 46.64 1.836 42.98 1.692 44.81 1.764 45.32 1.784 46.64 1.836 34.00 1.339 44 44.39 1.748 50.64 1.994 46.98 1.850 48.81 1.922 49.32 1.942 50.64 1.994 38.00 1.496 50 50.39 1.984 56.64 2.230 52.98 2.086 54.81 2.158 55.32 2.178 56.64 2.230 44.00 1.732 C C CENTER BUMP WITH SOCKET WITHOUT OPTIONS CENTER FRICTION BUMP OPTION CENTER BUMP OPTION FRICTION BUMP OPTION ALL POSITIONS 6-12 POSITIONS ONLY ALL POSITIONS 14-50 POSITIONS ORDERING INFORMATION TIER 1 - BEST TIER 2 - BETTER TIER 3 - VALUE B B 1581XX-1X00 1582XX-0X20XX 1583XX-211015 TIER TIER TIER PLATING PLATING PLATING 1 = BEST 2 = BETTER 3 = VALUE BLANK = 0.76 m BLANK = 0.76 m 15 = 0.38 m 30 in GOLD 30 in GOLD 15 in GOLD POSITION COUNT POSITION COUNT 15 = 0.38 m POSITION COUNT (SEE TABLE) (SEE TABLE) (SEE TABLE) 15 in GOLD PACKAGING 1 = BULK PACK PART CONFIGURATION PART CONFIGURATION PART CONFIGURATION PACKAGING PACKAGING 1 = ADHESIVE COVER 0 = PREASSEMBLED COVER 2 = SEPARATE COVER 0 = TRAY 2 = SWORDS POLARIZATION/LATCHING POLARIZATION/LATCHING POLARIZATION/LATCHING 1 = WITH CENTER BUMP, 0 = NO CENTER BUMP, 1 = WITH CENTER BUMP, NO FRICTION BUMPS (6-50 POS) NO FRICTION BUMPS (6-50 POS) NO FRICTION BUMPS (6-50 POS) G 73037 OCT 27,2017 SBC SAN UPDATED PERFORMANCE TABLE 1 = WITH CENTER BUMP, REMOVED REV D,E,F NO FRICTION BUMPS, (6-50 POS) HISTORY A 30741 OCT 28,2010 LDS SF 2 = WITH CENTER BUMP AND DUAL INITIAL RELEASE FRICTION BUMPS (14-50 POS ONLY) DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD ACCESS DRFT DATE MFG DATE CODES L. SCHMIDT JUL 23,2010 3 = WITH CENTRAL FRICTION BUMP, CHKD DATE APPVL DATE S. FELDMAN JUL 30,2010 A A NO CENTER BUMP (6-12 POS ONLY) DIVISION DIVISION CODE C 3M COPYRIGHT 2017 3M Center This document and the information it contains are 3M property and may not be reproduced or further St. Paul, SCALE TOLERANCES DO NOT distributed without 3M permission, or used or EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 6 SCALE All rights reserved. NOTED 1 DRAWING TITLE INCHES STRAIN RELIEF .0 METRIC ENGLISH 3M RIBBON CABLE 3448-158XX .00 .000 SOCKET 2 MM x 2 MM THIRD ANGLE PROJECTION .0000 POSITION COUNT MILLIMETERS INTERPRET PER PITCH 158 SERIES ASME Y14.5 - 2009 0 2 (SEE TABLE) .0 .5 CAGE SIZE DRAWING NO. REV. MAX SURFACE ROUGHNESS .00 .13 NUMBER ALL SURFACES .000 .005 78-5100-2358-9 G 125 MODEL DET. MARKED ONLY ANGLES 1 YES NO SHT 2 OF 3 LISTS 8 7 6 5 4 3 2 1 78-5100-2358-9 G DRAWING NUMBER REVISION Imaged: G.1 Central Standard Time10/27/2017UTC Offset