3M Surface Mount Header .100 .100 High Temperature N4600 Series Compliant gull wing leads make a reliable surface mount connection which is easily inspectable Optional ejector latches Shrouded to prevent physical and chemical pin damage High temperature plastic for vapor phase reflow process Slotted mounting flanges for securing header to board Raised body for easy inspection and repair Leads are protected within the body shadow RoHS Compliant. See the Regulatory Information Appendix (RIA) in the RoHS Compliance section of www.3Mconnectors.com for compliance information. Date Modified: May 8, 2013 TS-0168-E Sheet 1 of 3 Physical Insulator Glass Filled Polyester (PCT) Material: UL 94V0 Flammability: Black Color: Contact: Copper Alloy Material: Plating 100 2.54 m Nickel Underplating: 30 0.76 m Gold Wiping Area: 200 5.08 m 60/40 Tin Lead or 300 Matte Tin (See Ordering Information) Solder Tails: Marking: 3M Logo, Part Identification Number and Orientation Triangle Electrical Current Rating: 4.75 A, 1 Line Powered 2.25 A, 6 Adjacent Lines Powered 1.25 A, All Lines Powered Rating Conditions: EIA364 070 Method 2, 30C maximum temperature rise, 20% derated. Reference appropriate 3M Product Specification for detailed current derating curves. 9 Insulation Resistance: >1 x 10 W at 500 V DC Withstanding Voltage: 1,000 V at Sea Level RMS Environmental -55C to +105C Temperature Rating: 260C (per JSTD020C) Process: 1 (per JSTD 020C) Moisture Sensitivity Level: UL File No.: E68080 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions 3M Surface Mount Header .100 .100 High Temperature N4600 Series -22XX -23XX Header with Header with -20XX Short Ejector/Latch Long Ejector/Latch Header with for 3M Sockets without for 3M Sockets with no Ejector/Latch Strain Relief Strain Relief .56 .41 10.4 14.2 .22 Ref 5.6 .37 Ref 9.4 A B C 2X R .06 1.5 D (See Note 2) .155 .010 3.94 .33 8.4 Position 1 .165 4.19 .25 6.4 .100 Ref 2.54 Position 1 Optional Orientation Ejector Latch .17 4.3 Triangle A .100 Ref 2.54 .243 Ref .25 Ref 6.17 6.4 .025 Sq Typ 0.64 .525 13.34 .235 Notch A .150 3.81 (See Table 1 & Note 1) 5.97 A Section A-A .100 Typ Ref 2.54 Notch C Notch B (See Table 1 & Note 1) (See Table 1) Inch (mm) Tolerance Unless Noted C .00 .000 .0 .005 .1 .01 Inch Dimensions for Notes: Reference only 1. Notches A and C will accommodate 3M Polarization Key N3518. 2. Accepts a 4, 2, or 3 mm Panhead Machine Screw and Nut. 3. Mounting ears provide mechanical protection to solder joints and are recommended. For applications where there is not room for mounting ears, ejector/latches should be used. TS-0168-E Sheet 2 of 3 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions