3M Surface Mount Header
.100 .100 High Temperature N4600 Series
Compliant gull wing leads make a reliable surface mount
connection which is easily inspectable
Optional ejector latches
Shrouded to prevent physical and chemical pin damage
High temperature plastic for vapor phase reflow process
Slotted mounting flanges for securing header to board
Raised body for easy inspection and repair
Leads are protected within the body shadow
RoHS Compliant. See the Regulatory Information
Appendix (RIA) in the RoHS Compliance section of
www.3Mconnectors.com for compliance information.
Date Modified: May 8, 2013 TS-0168-E
Sheet 1 of 3
Physical
Insulator
Glass Filled Polyester (PCT)
Material:
UL 94V0
Flammability:
Black
Color:
Contact:
Copper Alloy
Material:
Plating
100 [ 2.54 m ] Nickel
Underplating:
30 [ 0.76 m ] Gold
Wiping Area:
200 [ 5.08 m ] 60/40 Tin Lead or 300 Matte Tin (See Ordering Information)
Solder Tails:
Marking: 3M Logo, Part Identification Number and Orientation Triangle
Electrical
Current Rating: 4.75 A, 1 Line Powered
2.25 A, 6 Adjacent Lines Powered
1.25 A, All Lines Powered
Rating Conditions: EIA364 070 Method 2, 30C maximum temperature rise,
20% derated.
Reference appropriate 3M Product Specification for detailed current derating curves.
9
Insulation Resistance:
>1 x 10 W at 500 V
DC
Withstanding Voltage:
1,000 V at Sea Level
RMS
Environmental
-55C to +105C
Temperature Rating:
260C (per JSTD020C)
Process:
1 (per JSTD 020C)
Moisture Sensitivity Level:
UL File No.: E68080
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
800-225-5373
Interconnect Solutions
3M Surface Mount Header
.100 .100 High Temperature N4600 Series
-22XX -23XX
Header with Header with
-20XX
Short Ejector/Latch Long Ejector/Latch
Header with
for 3M Sockets without for 3M Sockets with
no Ejector/Latch
Strain Relief Strain Relief
.56
.41 [10.4]
[14.2]
.22 Ref [5.6] .37 Ref [9.4]
A
B
C
2X R .06
[1.5]
D
(See Note 2)
.155 .010
[3.94]
.33 [8.4]
Position 1
.165 [4.19]
.25 [6.4]
.100 Ref
[2.54]
Position 1 Optional
Orientation Ejector Latch
.17 [4.3]
Triangle
A
.100 Ref [2.54]
.243 Ref
.25 Ref
[6.17]
[6.4]
.025 Sq Typ
[0.64]
.525
[13.34]
.235
Notch A .150 [3.81]
(See Table 1 & Note 1) [5.97]
A Section A-A
.100 Typ Ref
[2.54] Notch C
Notch B
(See Table 1 & Note 1)
(See Table 1)
Inch
(mm)
Tolerance Unless Noted
C
.00 .000
.0
.005
.1 .01
Inch
[ ] Dimensions for
Notes:
Reference only
1. Notches A and C will accommodate 3M Polarization Key N3518.
2. Accepts a #4, #2, or 3 mm Panhead Machine Screw and Nut.
3. Mounting ears provide mechanical protection to solder joints and are recommended.
For applications where there is not room for mounting ears, ejector/latches should be used.
TS-0168-E
Sheet 2 of 3
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
800-225-5373
Interconnect Solutions