3754/26(300) 3M

3M Round Conductor Flat Cable .025 30 AWG Stranded, PVC 3754 Series Close spacing permits higher signal density PVC insulation provides excellent flexibility 30 AWG stranded on .025 inch spacing allows for mass termination as well as increased flexibility Recommended for use with the 82XXX-600X Series .050 x.100 Tripolarized Wiremount Mini Socket (82XXX-600X) and Pak 25 (P25E-XXX-STGF) See Regulatory Information Appendix (RIA for chemical compliance information (RIA E1 & C1 apply) Date Modified: May 14, 2009 TS-0875-C Sheet 1 of 2 Physical Insulation: Material: Polyvinyl Chloride (PVC) Color: Gray Marking: Standard: None Conductors: 30 AWG 7 X 38 7 X 0.102 Tinned Stranded Copper Electrical USA: 30V EU: <50V Voltage Rating: 10 >1 x 10 /10 ft 3 m Insulation Resistance: Unbalanced Balanced Characteristic Impedance: 73 122 20.8 pF/ft (68.2 pF/m) 12.0 pF/ft (39.4 pF/m) Capacitance: .11 H/ft (0.36 H/m) .18 H/ft (0.59 H/m) Inductance: 1.51 ns/ft (4.95 ns/m) 1.45 ns/ft (4.76 ns/m) Propagation Delay: 67% 70% Velocity of Propagation: Note: Unbalanced is measured between ground-signal-ground conductors. Balanced is measured between signal conductors within a pair. Environmental -20C to +105C Temperature Rating: USA:VW-1 Flammability Rating: UL File No.: E42769, Style No.: 20596 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions 3M Round Conductor Flat Cable .025 30 AWG Stranded, PVC 3754 Series Number of 3M Part Dimension A Dimension B Conductors Number 20 3754/20 0.500 .006 12.70 0.475 .004 12.07 26 3754/26 0.650 .006 16.51 0.625 .004 15.88 30 3754/30 0.750 .006 19.05 0.725 .006 18.42 32 3754/32 0.800 .008 20.32 0.775 .006 19.69 34 3754/34 0.850 .009 21.59 0.825 .006 20.96 36 3754/36 0.900 .009 22.86 0.875 .006 22.23 40 3754/40 1.000 .009 25.40 0.975 .006 24.77 50 3754/50 1.250 .009 31.75 1.225 .006 31.12 52 3754/52 1.300 .009 33.02 1.275 .006 32.39 60 3754/60 1.500 .012 38.10 1.475 .009 37.47 68 3754/68 1.700 .012 43.18 1.675 .009 42.55 80 3754/80 2.000 .015 50.80 1.975 .011 50.17 100 3754/100 2.500 .015 63.50 2.475 .012 62.87 A B .025 .002 Typ .013 .005 0.64 0.33 .025 .003 0.64 30 AWG 7 X 38 ( 7 X 0.102 ) Tinned PVC Insulation Stranded Copper Conductors Inch mm Tolerance Unless Noted .0 .00 .000 Inch .1 .01 .005 Dimensions for Reference Only Note: Red marking on one edge of cable designates wire 1. Ordering Information 3754/XX Number of Conductors (See Table) Note: Available in standard 100 ft or 300 ft rolls, please specify when ordering. Contact 3M for availability of additional conductor TS-0875-C counts and/or custom roll lengths. Sheet 2 of 2 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions