3M Round, Jacketed, Flat Cable .050 28 AWG Stranded, Mass-Term, PVC/PVC 3759 Series Round construction permits easier routing 28 AWG wire on .050 inch centers permits mass termination to broad line of IDC connectors Continuous bond and continuous split/bond allows for mass termination of IDC connectors Available in continuous bond (nonsplit) wire for ease of cable fabrication Meets external wiring requirements of National Electrical Code, Article 725 (CL2) Primary cable is zippable for branching or discrete terminations UL listed for USA and Canadian markets RoHS Compliant. See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: JUne 1, 2012 TS-0070-D Sheet 1 of 2 Physical Jacket Material: Polyvinyl Chloride (PVC) Color: Black PVC Color: Gray Primary Material:: Marking Standard: (UL) CL2 75C 28 AWG or AWM 20267 3M NU C WM II A/B 80C 300V FT1 EU <50V 28 AWG, 7 36 AWG 7 0.217 Tinned Stranded Copper Conductors: Polyester Film Inner Wrap: Electrical USA: N.E.C. 725, CL2 or AWM 300V Canada: 300V EU: <50V Voltage Rating: 10 Insulation Resistance: (Primary Cable) >1 x 10 /10 ft 3 m Unbalanced Balanced Characteristic Impedance: 90 133 Capacitance: 16.7 pF/ft 54.8 pF/m 11.9 pF/ft 39.0 pF/m 0.13 H/ft 0.44 H/m 0.21 H/ft 0.69 H/m Inductance: 1.50 ns/ft 4.92 ns/m 1.58 ns/ft 5.18 ns/m Propagation Delay: 68% 64% Velocity of Propagation: Note: Unbalanced is measured between ground-signal-ground conductors.Balanced is measured between conductors within a pair. Environmental USA: CL2 75C or AWM -20C to + 80C Canada: 80C Temperature Rating: USA: N.E.C. 725, CL2 Canada: FT1 Flammability Rating: UL File No.: E118773, Power Limited Circuit Cable: CL2 (or AWM Style 20267) 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions 3M Round, Jacketed, Flat Cable .050 28 AWG Stranded, Mass-Term, PVC/PVC 3759 Series Number of 3M Part Diameter A .03 Dimension B Conductors Number (See Note 2) 09 3759/09 0.26 6.6 0.40 10.2 C 10 3759/10 0.26 6.6 0.45 11.4 14 3759/14 0.27 6.9 0.65 16.5 15 3759/15 0.27 6.9 0.70 17.8 Inch 16 3759/16 0.27 6.9 0.75 19.1 Imm 20 3759/20 0.30 7.6 0.95 24.1 Tolerance Unless Noted 24 3759/24 0.33 8.4 1.15 29.2 Inch .0 .00 .000 25 3759/25 0.33 8.4 1.20 30.5 .1 .05 .010 26 3759/26 0.33 8.4 1.25 31.8 Dimensions for Reference Only 30 3759/30 0.37 9.4 1.45 36.8 34 3759/34 0.37 9.4 1.65 41.9 36 3759/36 0.39 9.9 1.75 44.5 37 3759/37 0.39 9.9 1.80 45.7 40 3759/40 0.39 9.9 1.95 49.5 50 3759/50 0.44 11.2 2.45 62.2 60 3759/60 0.47 11.9 2.95 74.9 64 3759/64 0.50 12.7 3.15 80.0 2.4 Ref 61 Notes: 1. Red marking on one edge of primary cable designates wire 1. Bonded 1.0 Ref. 2. Dimension B pertains to bonded area only. Split 25 A B Paper Mfgr. Option Polyester Film .050 Typ .026 Min 0.66 1.27 PVC Jacket PVC Primary Insulation 28 AWG, 7 X 36 AWG 7 X 0.127 Tinned Stranded Copper Conductors Ordering Information 3759/XX XX XX Blank = Standard SF = Splice Free Number of Conductors (See Table) Blank = Continuous Split/Bonded Wire (Standard) SO = Continuously Bonded Wire (No Split) Note: Available in common lengths of 100 ft/roll or 300 ft/roll ( 30 m/roll or 91 m/roll), please specify when ordering. TS-0070-D Sheet 2 of 2 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions