3M Round, Jacketed, Flat Cable .050 28 AWG Stranded, Mass-Term, PVC/PVC 3759 Series Round construction permits easier routing 28 AWG wire on .050 inch centers permits mass termination to broad line of IDC connectors Continuous bond and continuous split/bond allows for mass termination of IDC connectors Available in continuous bond (nonsplit) wire for ease of cable fabrication Meets external wiring requirements of National Electrical Code, Article 725 (CL2) Primary cable is zippable for branching or discrete terminations UL listed for USA and Canadian markets RoHS* compliant TS-0070-22 Date Modified: November 15, 2006 Sheet 1 of 2 Physical Jacket Material: Polyvinyl Chloride (PVC) Color: Black Primary Material: PVC Color: Gray Marking Standard: (UL) CL2 75C 28 AWG or AWM 20267 3M NU C AWM II A/B 80C 300V FT1 EU <50V Conductors: 28 AWG, 7 36 AWG 7 0.217 Tinned Stranded Copper Inner Wrap: Polyester Film Electrical Voltage Rating: USA: N.E.C. 725, CL2 or AWM 300V Canada: 300V EU: <50V 10 Insulation Resistance: (Primary Cable)> 1 10 /10 ft. 3m Unbalanced Balanced Characteristic Impedance: 90 133 Capacitance: 16.7 pF/ft 54.8 pF/m 11.9 pF/ft 39.0 pF/m Inductance: 0.13 H/ft 0.44 H/m 0.21 /ft 0.69 /m Propagation Delay: 1.50 ns/ft 4.92 ns/m 1.58 ns/ft 5.18 ns/m Velocity of Propagation: 68% 64% Note:Unbalanced is measured between ground-signal-ground conductors. Balanced is measured between conductors within a pair. Environmental Temperature Rating: USA: CL2 75C or AWM -20C to + 80C Canada: 80C Flammability Rating: USA: N.E.C. 725, CL2 Canada: FT1RoHS complian means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or prolybromianted diphenyl ethers or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M s knowledge and belief based upon information provided by third party suppliers to 3M. UL File No.: E118773, Power Limited Circuit Cable: CL2 (or AWM Style 20267) 3 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call 3M Round, Jacketed, Flat Cable .050 28 AWG Stranded, Mass-Term, PVC/PVC 3759 Series Number of 3M Part Diameter A .03 Dimension B Conductors Number (See Note 2) 09 3759/09 0.26 6.6 0.40 10.2 10 3759/10 0.26 6.6 0.45 11.4 14 3759/14 0.27 6.9 0.65 16.5 15 3759/15 0.27 6.9 0.70 17.8 16 3759/16 0.27 6.9 0.75 19.1 Inch mm 20 3759/20 0.30 7.6 0.95 24.1 Tolerance Unless Noted 24 3759/24 0.33 8.4 1.15 29.2 .0 Inch .00 .000 25 3759/25 0.33 8.4 1.20 30.5 .010 .1 .05 26 3759/26 0.33 8.4 1.25 31.8 Dimensions for 30 3759/30 0.37 9.4 1.45 36.8 Reference only 34 3759/34 0.37 9.4 1.65 41.9 36 3759/36 0.39 9.9 1.75 44.5 37 3759/37 0.39 9.9 1.80 45.7 40 3759/40 0.39 9.9 1.95 49.5 50 3759/50 0.44 11.2 2.45 62.2 60 3759/60 0.47 11.9 2.95 74.9 64 3759/64 0.50 12.7 3.15 80.0 2.4 Ref 61 Notes: 1. Red marking on one edge of primary cable designates wire 1. Bonded 1.0 Ref. 2. Dimension B pertains to bonded area only. Split 25 A B Paper Mfgr. Option Polyester Film .050 Typ .026 Min 0.66 1.27 PVC Jacket PVC Primary Insulation 28 AWG, 7 X 36 AWG 7 X 0.127 Tinned Stranded Copper Conductors Ordering Information 3759/XX XX X00 XX Blank = Standard Blank = Standard C = Canadian Certified Version SF = Splice Free Length of Roll in Feet 100 = 100 ft Standard Number of Conductors 300 = 300 ft Standard (See Table) Blank = Continuous Split/Bonded Wire (Standard) Note: Contact 3M for availability of additional TS-0070-22 SO = Continuously Bonded Wire (No Split) conductor counts and/or custom roll lengths. Sheet 2 of 2 3 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call