3M D Sub Junction Shell Plastic Uses standard hardware Light weight, compact size Full family of sizes See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.3M.com/Interconnect for compliance information (RIA E1 & C1 apply) Date Modified: August 11, 2009 TS-0037-B Sheet 1 of 2 Physical Shell: Material: Glass Filled Polyester (PBT) Flammability: UL 94V-0 Color: Gray Brass Insert: Tape: 3M +130C Rubber Tape (3485-2X00F Only) (2) 2-56 .50 Roundhead Steel Zinc Screw: Mounting Hardware: See Specification Sheet TS-0142 Environmental -55C to +105C Temperature Rating: 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions 3M D Sub Junction Shell Plastic Round Cable Application Flat Cable Application 2-56 X 0.15 3.8 Threaded Insert (2) 2-56 X 0.15 3.8 Threaded Insert (2) 1.57 1.57 39.9 39.9 .66 Ref .66 Ref 16.8 A 16.8 A B B C Table 1 Dimensions Used On 3M Connector A Ref B Ref C Ref 8209, 8309 1.30 0.98 0.27 33.0 24.9 6.86 8215, 8315 1.63 1.31 0.28 41.4 33.3 7.11 8225, 8325 2.17 1.85 0.34 55.1 47.0 8.64 8237, 8337 2.82 2.50 0.38 71.6 63.5 9.65 Inch mm Tolerance Unless Noted .0 .00 .000 inch .1 .01 .005 Notes: Use only with thru hole style flange on connector. Dimension for Reference Only Inserts will interfere with shell housing. Uses Jack Socket 3341-4 and Jack Screw 3342-2. See TS-0142. Ordering Information 3485-2X00X Contact Quantity: Cable Type: 1 = 9 Position F = Flat Cable 2 = 15 Position R = Round Cable 3 = 25 Position 4 = 37 Position TS-0037-B Sheet 2 of 2 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions